[PATCH] ARM: dts: rockchip: Fix LED node names on rk3288-phycore-rdk

[Fabio Estevam]

From: Fabio Estevam <festevam at nabladev.com>

According to nxp,pca953x.yaml, the pattern for the led names should be:
 "^led-[0-9a-z]+$".

Change it accordingly to fix the following dt-schema warning"

leddimmer at 62 (nxp,pca9533): 'led1', 'led2', 'led3', 'led4' do not match any
of the regexes: '^led-[0-9a-z]+$', '^pinctrl-[0-9]+$'

Signed-off-by: Fabio Estevam <festevam at nabladev.com>
---
 arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts
index d411fd9811fd..46362e804daf 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-phycore-rdk.dts
@@ -125,25 +125,25 @@ leddim: leddimmer at 62 {
 		compatible = "nxp,pca9533";
 		reg = <0x62>;
 
-		led1 {
+		led-1 {
 			label = "red:user1";
 			linux,default-trigger = "none";
 			type = <PCA9532_TYPE_LED>;
 		};
 
-		led2 {
+		led-2 {
 			label = "green:user2";
 			linux,default-trigger = "none";
 			type = <PCA9532_TYPE_LED>;
 		};
 
-		led3 {
+		led-3 {
 			label = "blue:user3";
 			linux,default-trigger = "none";
 			type = <PCA9532_TYPE_LED>;
 		};
 
-		led4 {
+		led-4 {
 			label = "red:user4";
 			linux,default-trigger = "none";
 			type = <PCA9532_TYPE_LED>;
-- 
2.43.0