[PATCH v3 3/3] arm64: dts: rockchip: Add Orange Pi 5 Pro board support
Dennis Gilmore
dennis at ausil.us
Mon Mar 9 19:39:43 PDT 2026
On Thu, Mar 5, 2026 at 9:29 PM Jimmy Hon <honyuenkwun at gmail.com> wrote:
>
> On Thu, Mar 5, 2026 at 8:46 PM <dennis at ausil.us> wrote:
> >
> > From: Dennis Gilmore <dennis at ausil.us>
> >
> > Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
> >
> > - eMMC module, you can optionally solder a SPI NOR in place and turn
> > off the eMMC
> > - PCIe-attached NIC (pcie2x1l1)
> > - PCIe NVMe slot (pcie2x1l2)
> > - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> > - BCM4345C5 Bluetooth
> > - es8388 audio
> > - USB 2.0 and USB 3.0
> >
> > Vendors description and links to schematics available:
> > http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
> >
> > Signed-off-by: Dennis Gilmore <dennis at ausil.us>
> > ---
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 311 ++++++++++++++++++
> > 2 files changed, 312 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 4d384f153c13..c99dca2ae9e7 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > new file mode 100644
> > index 000000000000..d848891e09be
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > @@ -0,0 +1,311 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +
> > +/dts-v1/;
> > +
> > +#include "rk3588s-orangepi-5.dtsi"
> > +
> > +/ {
> > + model = "Xunlong Orange Pi 5 Pro";
> > + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> > +
> > + aliases {
> > + mmc0 = &sdhci;
> > + mmc1 = &sdmmc;
> > + mmc2 = &sdio;
> > + };
> > +
> > + analog-sound {
> > + compatible = "simple-audio-card";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hp_detect>;
> > + simple-audio-card,bitclock-master = <&masterdai>;
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,frame-master = <&masterdai>;
> > + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> > + simple-audio-card,mclk-fs = <256>;
> > + simple-audio-card,name = "rockchip,es8388";
> > + simple-audio-card,routing =
> > + "Headphones", "LOUT1",
> > + "Headphones", "ROUT1",
> > + "LINPUT1", "Microphone Jack",
> > + "RINPUT1", "Microphone Jack",
> > + "LINPUT2", "Onboard Microphone",
> > + "RINPUT2", "Onboard Microphone";
> > + simple-audio-card,widgets =
> > + "Microphone", "Microphone Jack",
> > + "Microphone", "Onboard Microphone",
> > + "Headphone", "Headphones";
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&i2s2_2ch>;
> > + };
> > +
> > + masterdai: simple-audio-card,codec {
> > + sound-dai = <&es8388>;
> > + system-clock-frequency = <12288000>;
> > + };
> > + };
> > +
> > + pwm-leds {
> > + compatible = "pwm-leds";
> > +
> > + led-0 {
> > + color = <LED_COLOR_ID_BLUE>;
> > + function = LED_FUNCTION_STATUS;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm15 0 1000000 0>;
> > + };
> > +
> > + led-1 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_ACTIVITY;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm3 0 1000000 0>;
> > + };
> > + };
> > +
> > + fan: pwm-fan {
> > + compatible = "pwm-fan";
> > + #cooling-cells = <2>;
> > + cooling-levels = <0 50 100 150 200 255>;
> > + fan-supply = <&vcc5v0_sys>;
> > + pwms = <&pwm2 0 20000000 0>;
> > + };
> > +
> > + vcc3v3_pcie_m2: regulator-vcc3v3-pcie-m2 {
> > + compatible = "regulator-fixed";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_pcie_m2";
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_pcie20";
> Is this vcc3v3_phy1 in the schematic?
>
> > + startup-delay-us = <50000>;
> > + vin-supply = <&vcc5v0_sys>;
> according to the schematic, this is fed by vcc_3v3_s3
Thanks for the review, Jimmy.
You're right on the vin-supply point — this should be vcc_3v3_s3, not
vcc5v0_sys. I'll fix it
Regarding "Is this vcc3v3_phy1?", that is the source. vcc3v3_pcie20
came from copying from rk3588s-orangepi-5.dts I will rename it to
match the label in the schematic
> > + };
> > +
> > + vcc5v0_otg: regulator-vcc5v0-otg {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vcc5v0_otg_en>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-name = "vcc5v0_otg";
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + sdio_pwrseq: sdio-pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + clocks = <&hym8563>;
> > + clock-names = "ext_clock";
> > + post-power-on-delay-ms = <200>;
> > + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1m4_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3m0_xfer>;
> > + status = "okay";
> > +
> > + es8388: audio-codec at 11 {
> > + compatible = "everest,es8388", "everest,es8328";
> > + reg = <0x11>;
> > + #sound-dai-cells = <0>;
> > + AVDD-supply = <&vcc_3v3_s0>;
> > + DVDD-supply = <&vcc_1v8_s0>;
> > + HPVDD-supply = <&vcc_3v3_s0>;
> > + PVDD-supply = <&vcc_3v3_s0>;
> > + assigned-clock-rates = <12288000>;
> > + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c4m3_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2s2_2ch {
> > + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_mclk &i2s2m1_sclk
> > + &i2s2m1_sdi &i2s2m1_sdo>;
> > + status = "okay";
> > +};
> > +
> > +&package_thermal {
> > + polling-delay = <1000>;
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&package_fan0>;
> > + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> > + };
> > +
> > + map1 {
> > + trip = <&package_fan1>;
> > + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> > + };
> > + };
> > +
> > + trips {
> > + package_fan0: package-fan0 {
> > + hysteresis = <2000>;
> > + temperature = <55000>;
> > + type = "active";
> > + };
> > +
> > + package_fan1: package-fan1 {
> > + hysteresis = <2000>;
> > + temperature = <65000>;
> > + type = "active";
> > + };
> > + };
> > +};
> > +
> > +/* NVMe */
> > +&pcie2x1l1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
> > + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> > + supports-clkreq;
> > + vpcie3v3-supply = <&vcc3v3_pcie_m2>;
> Is this real? In the schematic, the supply looks like vcc_3v3_s3.
It is not real, since there's no discrete regulator (VCC_3V3_S3 feeds
the M.2 slot directly), I'll drop that node and have pcie2x1l1
reference vcc_3v3_s3 directly.
Dennis
> > + status = "okay";
> > +};
> > +
> > +/* NIC */
> > +&pcie2x1l2 {
> > + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> > + vpcie3v3-supply = <&vcc3v3_pcie20>;
> > + status = "okay";
> > +};
> > +
> > +&pinctrl {
> > + bluetooth {
> > + bt_wake_gpio: bt-wake-pin {
> > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + bt_wake_host_irq: bt-wake-host-irq {
> > + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +
> > + usb {
> > + vcc5v0_otg_en: vcc5v0-otg-en {
> > + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > + wlan {
> > + wifi_host_wake_irq: wifi-host-wake-irq {
> > + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +};
> > +
> > +&pwm15 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm15m2_pins>;
> > + status = "okay";
> > +};
> > +
> > +&pwm2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm2m1_pins>;
> > + status = "okay";
> > +};
> > +
> > +&pwm3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pwm3m2_pins>;
> > + status = "okay";
> > +};
> > +
> > +&sdhci {
> > + status = "okay";
> > +};
> > +
> > +&sdio {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + bus-width = <4>;
> > + cap-sd-highspeed;
> > + cap-sdio-irq;
> > + keep-power-in-suspend;
> > + max-frequency = <150000000>;
> > + mmc-pwrseq = <&sdio_pwrseq>;
> > + no-mmc;
> > + no-sd;
> > + non-removable;
> > + sd-uhs-sdr104;
> > + status = "okay";
> > +
> > + ap6256: wifi at 1 {
> > + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
> > + reg = <1>;
> > + interrupt-names = "host-wake";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_host_wake_irq>;
> > + };
> > +};
> > +
> > +&u2phy0_otg {
> > + phy-supply = <&vcc5v0_otg>;
> > +};
> > +
> > +&uart9 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
> > + uart-has-rtscts;
> > + status = "okay";
> > +
> > + bluetooth {
> > + compatible = "brcm,bcm4345c5";
> > + clocks = <&hym8563>;
> > + clock-names = "lpo";
> > + device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
> > + interrupt-names = "host-wakeup";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
> > + max-speed = <1500000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
> > + shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
> > + vbat-supply = <&vcc_3v3_s3>;
> > + vddio-supply = <&vcc_1v8_s3>;
> > + };
> > +};
> > +
> > +&usb_host0_xhci {
> > + dr_mode = "host";
> > +};
> > +
> > +&usbdp_phy0 {
> > + rockchip,dp-lane-mux = <0 1>;
> > +};
> > --
> > 2.53.0
> >
More information about the Linux-rockchip
mailing list