[PATCH 3/4] arm64: dts: rockchip: add mipi csi-2 receiver nodes to rk3588

[Michael Riesch via B4 Relay]

From: Michael Riesch <michael.riesch at collabora.com>

The Rockchip RK3588 features six MIPI CSI-2 receiver units:
 - MIPI0: connected to MIPI DCPHY0 (not supported)
 - MIPI1: connected to MIPI DCPHY1 (not supported)
 - MIPI2: connected to MIPI DPHY0
 - MIPI3: connected to MIPI DPHY0-1 (not supported)
 - MIPI4: connected to MIPI DPHY1
 - MIPI5: connected to MIPI DPHY1-1 (not supported)
As the MIPI DCPHYs as well as the split DPHY mode of the DPHYs
are not yet supported, add only the device tree nodes for the
MIPI2 and MIPI4 units.

Signed-off-by: Michael Riesch <michael.riesch at collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 7fe9593d8c19..3bbd057ca504 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -1430,6 +1430,58 @@ av1d: video-codec at fdc70000 {
 		resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
 	};
 
+	csi2: csi at fdd30000 {
+		compatible = "rockchip,rk3588-mipi-csi2";
+		reg = <0x0 0xfdd30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "err1", "err2";
+		clocks = <&cru PCLK_CSI_HOST_2>;
+		phys = <&csi_dphy0>;
+		power-domains = <&power RK3588_PD_VI>;
+		resets = <&cru SRST_P_CSI_HOST_2>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_in: port at 0 {
+				reg = <0>;
+			};
+
+			csi2_out: port at 1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	csi4: csi at fdd50000 {
+		compatible = "rockchip,rk3588-mipi-csi2";
+		reg = <0x0 0xfdd50000 0x0 0x10000>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "err1", "err2";
+		clocks = <&cru PCLK_CSI_HOST_4>;
+		phys = <&csi_dphy1>;
+		power-domains = <&power RK3588_PD_VI>;
+		resets = <&cru SRST_P_CSI_HOST_4>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi4_in: port at 0 {
+				reg = <0>;
+			};
+
+			csi4_out: port at 1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	vop: vop at fdd90000 {
 		compatible = "rockchip,rk3588-vop";
 		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;

-- 
2.39.5