[PATCH v2] arm64: dts: rockchip: rock-3b: Model PI6C20100 as gated-fixed-clock

[MidG971]

The Radxa ROCK 3B uses a PI6C20100 PCIe reference clock buffer to
provide a 100MHz reference clock to the PCIe 3.0 PHY and controllers.
This chip is currently modeled only as a fixed regulator
(vcc3v3_pi6c_03), with no clock output representation.

The PI6C20100 is a clock generator, not a power supply. Model it
properly as a gated-fixed-clock, following the pattern established
for the Rock 5 ITX and other boards with similar PCIe clock buffer
chips.

The regulator node is kept as-is since it controls the power supply
to the PI6C20100 chip via GPIO0_D4. The new gated-fixed-clock node
references this regulator as its vdd-supply and provides a proper
100MHz clock output. The pcie3x2 node is updated to include the
reference clock, matching the approach used in rk3588-rock-5-itx.dts.

Signed-off-by: Claude <noreply at anthropic.com>
Signed-off-by: MidG971 <midgy971 at gmail.com>
---

Changes since v1 [1]:
 - Drop phy-supply approach entirely (Jonas, Shawn)
 - Model PI6C20100 as gated-fixed-clock instead
 - Wire reference clock to pcie3x2 controller
 - Follow pattern from rk3588-rock-5-itx.dts

[1] https://lore.kernel.org/linux-rockchip/20260213151452.535527-1-midgy971@gmail.com/

 .../arm64/boot/dts/rockchip/rk3568-rock-3b.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
index 69001e4..24befc9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
@@ -56,7 +56,16 @@
 		};
 	};

-	/* pi6c pcie clock generator */
+	/* PI6C20100 PCIe reference clock buffer (100MHz) */
+	pcie30_refclk: pcie-clock-generator {
+		compatible = "gated-fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "pcie30_refclk";
+		vdd-supply = <&vcc3v3_pi6c_03>;
+	};
+
+	/* PI6C20100 power supply - active-high GPIO0_D4 */
 	vcc3v3_pi6c_03: regulator-3v3-vcc-pi6c-03 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -553,6 +562,13 @@
 };

 &pcie3x2 {
+	clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+		 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+		 <&cru CLK_PCIE30X2_AUX_NDFT>,
+		 <&pcie30_refclk>;
+	clock-names = "aclk_mst", "aclk_slv",
+		      "aclk_dbi", "pclk", "aux",
+		      "ref";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie30x2m1_pins>;
 	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
--
2.39.5