[PATCH 2/2] arm64: dts: rockchip: Add Orange Pi 5 Pro board support

[Heiko Stuebner]

Hi Dennis,

Am Samstag, 28. Februar 2026, 21:54:17 Mitteleuropäische Normalzeit schrieb dennis at ausil.us:
> From: Dennis Gilmore <dennis at ausil.us>
> 
> Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S). The Pro
> differs from the base Orange Pi 5 in the following ways:
> 
> - No SPI NOR flash; eMMC module slot instead, you can optionally solder
>   a SPI NOR fin place and turn off the eMMC
> - PCIe-attached NIC (pcie2x1l1) replaces the GMAC1 ethernet
> - PCIe NVMe slot (pcie2x1l2)
> - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> - BCM4345C5 Bluetooth via uart9 with full RTS/CTS
> - Two-colour (blue/green) GPIO LED using modern color/function binding
> - audio is wired up differently
> 
> Vendors description and links to schematics available:
> http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-5-Pro.html
> 
> Signed-off-by: Dennis Gilmore <dennis at ausil.us>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3588s-orangepi-5-pro.dts   | 376 ++++++++++++++++++
>  2 files changed, 377 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4d384f153c13..c99dca2ae9e7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> new file mode 100644
> index 000000000000..d656328c906d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> @@ -0,0 +1,376 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> +	model = "Xunlong Orange Pi 5 Pro";
> +	compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> +
> +	aliases {
> +		/delete-property/ ethernet0;
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	/* Pro uses gpio-leds instead; pwm0 LED is not wired up */
> +	/delete-node/ pwm-leds;
> +
> +	/*
> +	 * Pro uses i2s2 (i2s2m1 mux) for audio, not i2s1. Recreate the sound
> +	 * card node pointing at i2s2_2ch instead.
> +	 */
> +	/delete-node/ analog-sound;

I think it would make more sense to move the relevant not-shared part
out of the dtsi instead. Yes the duplication in orangepi-5 and orangepi-5b
should be fine.

Having a devicetree with so many /delete-node/ and /delete-property/
elements sprinkled throughout the file, will definitly cause readability
(and handling issues) in the future.

Additionally this makes all the comments in the file explaining individual
difference unnecessary.


Thanks
Heiko