[PATCH v9 03/19] drm/bridge: Act on the DRM color format property

[Dmitry Baryshkov]

On Fri, Feb 27, 2026 at 08:20:08PM +0100, Nicolas Frattaroli wrote:
> The new DRM color format property allows userspace to request a specific
> color format on a connector. In turn, this fills the connector state's
> color_format member to switch color formats.
> 
> Make drm_bridges consider the color_format set in the connector state
> during the atomic bridge check. For bridges that represent HDMI bridges,
> rely on whatever format the HDMI logic set. Reject any output bus
> formats that do not correspond to the requested color format.
> 
> Non-HDMI last bridges with DRM_CONNECTOR_COLOR_FORMAT_AUTO set will end
> up choosing the first output format that functions to make a whole
> recursive bridge chain format selection succeed.
> 
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
> ---
>  drivers/gpu/drm/drm_bridge.c | 89 +++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 88 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> index 6d8947419940..5938fba0a983 100644
> --- a/drivers/gpu/drm/drm_bridge.c
> +++ b/drivers/gpu/drm/drm_bridge.c
> @@ -1117,6 +1117,47 @@ static int select_bus_fmt_recursive(struct drm_bridge *first_bridge,
>  	return ret;
>  }
>  
> +static bool __pure bus_format_is_color_fmt(u32 bus_fmt, enum drm_connector_color_format fmt)
> +{
> +	if (fmt == DRM_CONNECTOR_COLOR_FORMAT_AUTO)
> +		return true;
> +
> +	switch (bus_fmt) {
> +	case MEDIA_BUS_FMT_FIXED:
> +		return true;
> +	case MEDIA_BUS_FMT_RGB888_1X24:
> +	case MEDIA_BUS_FMT_RGB101010_1X30:
> +	case MEDIA_BUS_FMT_RGB121212_1X36:
> +	case MEDIA_BUS_FMT_RGB161616_1X48:
> +		return fmt == DRM_CONNECTOR_COLOR_FORMAT_RGB444;
> +	case MEDIA_BUS_FMT_YUV8_1X24:
> +	case MEDIA_BUS_FMT_YUV10_1X30:
> +	case MEDIA_BUS_FMT_YUV12_1X36:
> +	case MEDIA_BUS_FMT_YUV16_1X48:
> +		return fmt == DRM_CONNECTOR_COLOR_FORMAT_YCBCR444;
> +	case MEDIA_BUS_FMT_UYVY8_1X16:
> +	case MEDIA_BUS_FMT_VYUY8_1X16:
> +	case MEDIA_BUS_FMT_YUYV8_1X16:
> +	case MEDIA_BUS_FMT_YVYU8_1X16:
> +	case MEDIA_BUS_FMT_UYVY10_1X20:
> +	case MEDIA_BUS_FMT_YUYV10_1X20:
> +	case MEDIA_BUS_FMT_VYUY10_1X20:
> +	case MEDIA_BUS_FMT_YVYU10_1X20:
> +	case MEDIA_BUS_FMT_UYVY12_1X24:
> +	case MEDIA_BUS_FMT_VYUY12_1X24:
> +	case MEDIA_BUS_FMT_YUYV12_1X24:
> +	case MEDIA_BUS_FMT_YVYU12_1X24:
> +		return fmt == DRM_CONNECTOR_COLOR_FORMAT_YCBCR422;
> +	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
> +	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
> +	case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
> +	case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
> +		return fmt == DRM_CONNECTOR_COLOR_FORMAT_YCBCR420;
> +	default:
> +		return false;
> +	}
> +}
> +
>  /*
>   * This function is called by &drm_atomic_bridge_chain_check() just before
>   * calling &drm_bridge_funcs.atomic_check() on all elements of the chain.
> @@ -1160,6 +1201,7 @@ drm_atomic_bridge_chain_select_bus_fmts(struct drm_bridge *bridge,
>  	struct drm_encoder *encoder = bridge->encoder;
>  	struct drm_bridge_state *last_bridge_state;
>  	unsigned int i, num_out_bus_fmts = 0;
> +	enum drm_connector_color_format fmt;
>  	u32 *out_bus_fmts;
>  	int ret = 0;
>  
> @@ -1201,13 +1243,58 @@ drm_atomic_bridge_chain_select_bus_fmts(struct drm_bridge *bridge,
>  			out_bus_fmts[0] = MEDIA_BUS_FMT_FIXED;
>  	}
>  
> +	/*
> +	 * On HDMI connectors, use the output format chosen by whatever does the
> +	 * HDMI logic. For everyone else, just trust that the bridge out_bus_fmts
> +	 * are sorted by preference for %DRM_CONNECTOR_COLOR_FORMAT_AUTO, as
> +	 * bus_format_is_color_fmt() always returns true for AUTO.
> +	 */
> +	if (last_bridge->ops & DRM_BRIDGE_OP_HDMI) {

This will break the logic if there is anything after the HDMI bridge.
For example, if the board has hdmi-connector (yep, it's a bridge without
DRM_BRIDGE_OP_HDMI, because HDMI connectors don't implement any of the
HDMI functionality), then the function will go to the second clause.

This probably needs to be moved to drm_bridge_connector. There is is
natural to check for bridge_connector->bridge_hdmi.

> +		drm_dbg_kms(last_bridge->dev,
> +			    "HDMI bridge requests format %s\n",
> +			    drm_hdmi_connector_get_output_format_name(
> +				    conn_state->hdmi.output_format));
> +		switch (conn_state->hdmi.output_format) {
> +		case DRM_OUTPUT_COLOR_FORMAT_RGB444:
> +			fmt = DRM_CONNECTOR_COLOR_FORMAT_RGB444;
> +			break;
> +		case DRM_OUTPUT_COLOR_FORMAT_YCBCR444:
> +			fmt = DRM_CONNECTOR_COLOR_FORMAT_YCBCR444;
> +			break;
> +		case DRM_OUTPUT_COLOR_FORMAT_YCBCR422:
> +			fmt = DRM_CONNECTOR_COLOR_FORMAT_YCBCR422;
> +			break;
> +		case DRM_OUTPUT_COLOR_FORMAT_YCBCR420:
> +			fmt = DRM_CONNECTOR_COLOR_FORMAT_YCBCR420;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +			goto out_free_bus_fmts;
> +		}
> +	} else {
> +		fmt = conn_state->color_format;
> +		drm_dbg_kms(last_bridge->dev, "Non-HDMI bridge requests format %d\n", fmt);
> +	}
> +
>  	for (i = 0; i < num_out_bus_fmts; i++) {
> +		if (!bus_format_is_color_fmt(out_bus_fmts[i], fmt)) {
> +			drm_dbg_kms(last_bridge->dev,
> +				    "Skipping bus format 0x%04x as it doesn't match format %d\n",
> +				    out_bus_fmts[i], fmt);
> +			ret = -ENOTSUPP;
> +			continue;
> +		}
>  		ret = select_bus_fmt_recursive(bridge, last_bridge, crtc_state,
>  					       conn_state, out_bus_fmts[i]);
> -		if (ret != -ENOTSUPP)
> +		if (ret != -ENOTSUPP) {
> +			drm_dbg_kms(last_bridge->dev,
> +				    "Found bridge chain ending with bus format 0x%04x\n",
> +				    out_bus_fmts[i]);
>  			break;
> +		}
>  	}
>  
> +out_free_bus_fmts:
>  	kfree(out_bus_fmts);
>  
>  	return ret;
> 
> -- 
> 2.53.0
> 

-- 
With best wishes
Dmitry