[PATCH V15 8/9] iio: imu: inv_icm42607: Add Temp Support in icm42607
Chris Morgan
macroalpha82 at gmail.com
Fri Jun 26 09:12:29 PDT 2026
From: Chris Morgan <macromorgan at hotmail.com>
Add functions for reading temperature sensor data.
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
drivers/iio/imu/inv_icm42607/Makefile | 1 +
.../iio/imu/inv_icm42607/inv_icm42607_accel.c | 8 ++
.../iio/imu/inv_icm42607/inv_icm42607_gyro.c | 8 ++
.../iio/imu/inv_icm42607/inv_icm42607_temp.c | 98 +++++++++++++++++++
.../iio/imu/inv_icm42607/inv_icm42607_temp.h | 38 +++++++
5 files changed, 153 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index 8e73385c8f4b..7b907e019601 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
inv-icm42607-y += inv_icm42607_core.o
inv-icm42607-y += inv_icm42607_gyro.o
inv-icm42607-y += inv_icm42607_accel.o
+inv-icm42607-y += inv_icm42607_temp.o
obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
inv-icm42607-i2c-y += inv_icm42607_i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
index 8ef9fdae1bc8..5ff6756b9515 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_accel.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
#define INV_ICM42607_ACCEL_CHAN(_modifier, _index, _ext_info) \
{ \
@@ -40,6 +41,7 @@ enum inv_icm42607_accel_scan {
INV_ICM42607_ACCEL_SCAN_X,
INV_ICM42607_ACCEL_SCAN_Y,
INV_ICM42607_ACCEL_SCAN_Z,
+ INV_ICM42607_ACCEL_SCAN_TEMP,
};
static const struct iio_chan_spec_ext_info inv_icm42607_accel_ext_infos[] = {
@@ -54,6 +56,7 @@ static const struct iio_chan_spec inv_icm42607_accel_channels[] = {
inv_icm42607_accel_ext_infos),
INV_ICM42607_ACCEL_CHAN(IIO_MOD_Z, INV_ICM42607_ACCEL_SCAN_Z,
inv_icm42607_accel_ext_infos),
+ INV_ICM42607_TEMP_CHAN(INV_ICM42607_ACCEL_SCAN_TEMP),
};
static const int inv_icm42607_accel_scale_nano[][2] = {
@@ -186,6 +189,11 @@ static int inv_icm42607_accel_read_raw(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_ACCEL:
break;
+ case IIO_TEMP:
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+ return inv_icm42607_temp_read_raw(indio_dev, chan,
+ val, val2, mask);
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
index c7215b3826ad..4e5db5e19e9f 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
@@ -15,6 +15,7 @@
#include <linux/types.h>
#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
#define INV_ICM42607_GYRO_CHAN(_modifier, _index, _ext_info) \
{ \
@@ -40,6 +41,7 @@ enum inv_icm42607_gyro_scan {
INV_ICM42607_GYRO_SCAN_X,
INV_ICM42607_GYRO_SCAN_Y,
INV_ICM42607_GYRO_SCAN_Z,
+ INV_ICM42607_GYRO_SCAN_TEMP,
};
static const struct iio_chan_spec_ext_info inv_icm42607_gyro_ext_infos[] = {
@@ -54,6 +56,7 @@ static const struct iio_chan_spec inv_icm42607_gyro_channels[] = {
inv_icm42607_gyro_ext_infos),
INV_ICM42607_GYRO_CHAN(IIO_MOD_Z, INV_ICM42607_GYRO_SCAN_Z,
inv_icm42607_gyro_ext_infos),
+ INV_ICM42607_TEMP_CHAN(INV_ICM42607_GYRO_SCAN_TEMP),
};
static const int inv_icm42607_gyro_scale_nano[][2] = {
@@ -182,6 +185,11 @@ static int inv_icm42607_gyro_read_raw(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_ANGL_VEL:
break;
+ case IIO_TEMP:
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+ return inv_icm42607_temp_read_raw(indio_dev, chan,
+ val, val2, mask);
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
new file mode 100644
index 000000000000..8681ef2b49e2
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/unaligned.h>
+
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+static int inv_icm42607_temp_read(struct inv_icm42607_state *st, s16 *temp)
+{
+ struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
+ struct device *dev = regmap_get_device(st->map);
+ int ret, gyro_mode, accel_mode;
+ unsigned int val;
+ u8 raw[2];
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+ if (ret)
+ return ret;
+
+ guard(mutex)(&st->lock);
+
+ /*
+ * Check if both the gyro and accel are off and if so, enable one
+ * of them. The temp sensor cannot be read if both the gyro and
+ * accel sensor are off. Prefer to enable the accel over the gyro
+ * as the datasheet says the gyro uses 5x more power and it has
+ * a minimum run time of 45ms.
+ */
+ ret = regmap_read(st->map, INV_ICM42607_REG_PWR_MGMT0, &val);
+ if (ret)
+ return ret;
+
+ accel_mode = FIELD_GET(INV_ICM42607_PWR_MGMT0_ACCEL_MODE_MASK, val);
+ gyro_mode = FIELD_GET(INV_ICM42607_PWR_MGMT0_GYRO_MODE_MASK, val);
+ if (!gyro_mode && !accel_mode) {
+ /* enable accel sensor */
+ conf.mode = INV_ICM42607_SENSOR_MODE_LOW_NOISE;
+ ret = inv_icm42607_set_sensor_conf(st, &conf, IIO_ACCEL);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_bulk_read(st->map, INV_ICM42607_REG_TEMP_DATA1,
+ raw, sizeof(raw));
+ if (ret)
+ return ret;
+
+ *temp = get_unaligned_be16(raw);
+ if (*temp == INV_ICM42607_DATA_INVALID)
+ return -EINVAL;
+
+ return 0;
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ s16 temp;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = inv_icm42607_temp_read(st, &temp);
+ if (ret)
+ return ret;
+ *val = temp;
+ return IIO_VAL_INT;
+ /*
+ * T°C = (temp / 128) + 25
+ * Tm°C = 1000 * ((temp * 100 / 12800) + 25)
+ * scale: 100000 / 12800 ~= 7.8125
+ * offset: 3200
+ */
+ case IIO_CHAN_INFO_SCALE:
+ *val = 7;
+ *val2 = 812500000;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = 3200;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
new file mode 100644
index 000000000000..18499b4d0b94
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#ifndef INV_ICM42607_TEMP_H_
+#define INV_ICM42607_TEMP_H_
+
+#include <linux/bitops.h>
+
+struct iio_dev;
+struct iio_chan_spec;
+
+#define INV_ICM42607_TEMP_CHAN(_index) \
+{ \
+ .type = IIO_TEMP, \
+ .info_mask_separate = \
+ BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask);
+
+#endif
--
2.43.0
More information about the Linux-rockchip
mailing list