[PATCH] pmdomain: rockchip: quiet regulator error on -EPROBE_DEFER

[Diederik de Haas]

On Wed Nov 19, 2025 at 5:12 PM CET, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Change the dev_err() to dev_err_probe() under rockchip_pd_power_on()
> to prevent errors early in the boot process when the requested
> regulator is not yet available. This converts errors like the following
> to debug messages:
>
> rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517

I noticed I had a LOT (33 to be exact) of these errors on my Rock 5B.
After building a kernel with just this patch added, those were all gone.
So feel free to add:

Tested-by: Diederik de Haas <diederik at cknow-tech.com>  # Rock 5B

I don't know if it's a logical consequence or just luck, but I'm no
longer getting the following error either:

  rockchip-pm-domain fd8d8000.power-management:power-controller: 
    Failed to create device link (0x180) with supplier spi2.0 for
    /power-management at fd8d8000/power-controller/power-domain at 12

I'm still getting the following error though:

  rockchip-pm-domain fd8d8000.power-management:power-controller:
    Failed to create device link (0x180) with supplier 1-0042 for
    /power-management at fd8d8000/power-controller/power-domain at 8

Those error msgs are broken up for readability, but they are on one line
in dmesg.

Thanks!
  Diederik

> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>  drivers/pmdomain/rockchip/pm-domains.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pmdomain/rockchip/pm-domains.c b/drivers/pmdomain/rockchip/pm-domains.c
> index 1955c6d453e4..3c84a65de1a5 100644
> --- a/drivers/pmdomain/rockchip/pm-domains.c
> +++ b/drivers/pmdomain/rockchip/pm-domains.c
> @@ -688,7 +688,8 @@ static int rockchip_pd_power_on(struct generic_pm_domain *domain)
>  
>  	ret = rockchip_pd_regulator_enable(pd);
>  	if (ret) {
> -		dev_err(pd->pmu->dev, "Failed to enable supply: %d\n", ret);
> +		dev_err_probe(pd->pmu->dev, ret,
> +			      "Failed to enable supply: %d\n", ret);
>  		return ret;
>  	}
>