[PATCH 1/2] arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S

[Diederik de Haas]

According to the NanoPi R5S 2204 schematic on page 6, GPIO0_C4 is for
GMAC0_INT/PMEB_GPIO0_C4, while GPIO0_C5 is for GMAC0_RSTn_GPIO0_C5.
While the 'reset-gpios' property was set correctly, the corresponding
pinctrl didn't match that.

Next to fixing the pinctrl definition, also change the node name and
phandle to match what is used in the schematic.

Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Diederik de Haas <diederik at cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 718d1a2da8e5..90ce6f0e1dcf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -98,7 +98,7 @@ &mdio0 {
 	rgmii_phy0: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
 	};
 };
@@ -132,8 +132,8 @@ &pcie3x2 {
 
 &pinctrl {
 	gmac0 {
-		eth_phy0_reset_pin: eth-phy0-reset-pin {
-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		gmac0_rstn_gpio0_c5_pin: gmac0-rstn-gpio0-c5-pin {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.53.0