[PATCH v5 0/2] Add FriendlyElec NanoPi M5 support for Rockchip RK3576

[Heiko Stuebner]

On Sat, 28 Jun 2025 10:32:27 -0400, John Clark wrote:
> This series adds device tree support for the FriendlyElec NanoPi M5 board,
> powered by the Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52
> MC3 GPU, 6 TOPS NPU). The patches enable basic booting and connectivity,
> including dual 1Gbps Ethernet, USB 3.2, microSD, M.2 PCIe NVMe, and HDMI.
> 
> Changes in v5:
>  - Addressed Jonas Karlman's feedback:
>    - Added mmc0 alias for SD card
>    - Updated regulator names to match schematic (e.g., vcc12v_dcin,
>        vcc5v0_sys_s5, vcc3v3_m2_keym, vcc3v3_sd_s0, usb3_port2_5v,
>        vcc5v0_usb_otg0, vcc5v_hdmi_tx)
>    - Fixed vcc3v3_sd_s0 voltage to 3.3V
>    - Removed unnecessary regulator-state-mem for fixed regulators
>    - Removed vcc_5v0_device regulator
>    - Added pinctrl for Ethernet PHY reset GPIOs in mdio0 and mdio1
>    - Used correct pinctrl format for sdmmc and sfc1 (<&pin>)
>    - Increased SPI flash frequency to 50 MHz
>    - Updated LED colors (sys: red, led1/led2: green) and functions
>        (LED_FUNCTION_HEARTBEAT, LED_FUNCTION_LAN)
>    - Dropped rng node (enabled by default)
>    - Omitted HDMI mode-switching GPIO (to be added later with driver
>        support)
>    - Updated pinctrl names to match schematic (e.g., pcie0_pwren_h,
>        sdmmc0_pwren_h, usb3_host_pwren_h, usb_otg0_pwren_h, hp_det_l,
>        pcie0_perstn)
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
      commit: d15e51907ef472d31af0a4f735d4597b53dc379e
[2/2] arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
      commit: f2a71544d56bc8de459e1df9eecf616d141cd633

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>