[PATCH v10 07/10] arm64: dts: qcom: qcs6490-rb3gen2: Add PSCI SYSTEM_RESET2 types

[Shivendra Pratap]

From: Elliot Berman <elliot.berman at oss.qualcomm.com>

qcs6490-rb3gen2 firmware supports vendor-defined SYSTEM_RESET2 types.
Describe the reset types: "bootloader" will cause device to reboot and
stop in the bootloader's fastboot mode. "edl" will cause device to
reboot into "emergency download mode", which permits loading images via
the Firehose protocol.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Signed-off-by: Elliot Berman <elliot.berman at oss.qualcomm.com>
Signed-off-by: Shivendra Pratap <shivendra.pratap at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 5fbcd48f2e2d839835fa464a8d5682f00557f82e..7c06fe496e800e758d59ca793785d7c2907df8dd 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -966,6 +966,13 @@ &pon_resin {
 	status = "okay";
 };
 
+&psci {
+	reset-types {
+		mode-bootloader = <0x10001 0x2>;
+		mode-edl = <0 0x1>;
+	};
+};
+
 &qup_uart7_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power

-- 
2.34.1