[PATCH] arm64: dts: rockchip: add SPDIF audio to Beelink A1

[Christian Hewitt]

> On 4 Dec 2025, at 12:23 am, Alex Bee <knaerzche at gmail.com> wrote:
> 
> Hi Robin,
> 
> Am 03.12.25 um 17:21 schrieb Robin Murphy:
>> [ Just noticed this... ]
>> 
>> On 2025-08-28 5:43 pm, Christian Hewitt wrote:
>>> From: Alex Bee <knaerzche at gmail.com>
>>> 
>>> Add the required nodes to enable SPDIF audio output on
>>> the Beelink A1 set-top-box.
>> 
>> But the A1 doesn't have S/PDIF? Only HDMI plus a 3.5mm jack connected to the analog audio codec (and possibly the composite TV out) :/
>> 
> Yeah, sorry - this patch wasn't supposed to be submitted upstream.

Apologies, this is my enthusiasm for trying to clear out the patch
collection LibreELEC has been hoarding by sending things upstream
on behalf of the original authors (and hoarders).

Would you like me to send a revert patch?

Christian

> Regards,
> 
> Alex
> 
>> Thanks,
>> Robin.
>> 
>>> Signed-off-by: Alex Bee <knaerzche at gmail.com>
>>> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
>>> ---
>>>   arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 23 ++++++++++++++++++++++
>>>   1 file changed, 23 insertions(+)
>>> 
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
>>> index f7c4578865c5..b276a29bdd85 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
>>> @@ -58,6 +58,24 @@ ir-receiver {
>>>           gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
>>>           linux,rc-map-name = "rc-beelink-gs1";
>>>       };
>>> +
>>> +    spdif_sound: spdif-sound {
>>> +        compatible = "simple-audio-card";
>>> +        simple-audio-card,name = "SPDIF";
>>> +
>>> +        simple-audio-card,cpu {
>>> +            sound-dai = <&spdif>;
>>> +        };
>>> +
>>> +        simple-audio-card,codec {
>>> +            sound-dai = <&spdif_dit>;
>>> +        };
>>> +    };
>>> +
>>> +    spdif_dit: spdif-dit {
>>> +        compatible = "linux,spdif-dit";
>>> +        #sound-dai-cells = <0>;
>>> +    };
>>>   };
>>>     &analog_sound {
>>> @@ -325,6 +343,11 @@ &sdmmc {
>>>       status = "okay";
>>>   };
>>>   +&spdif {
>>> +    pinctrl-0 = <&spdifm0_tx>;
>>> +    status = "okay";
>>> +};
>>> +
>>>   &tsadc {
>>>       rockchip,hw-tshut-mode = <0>;
>>>       rockchip,hw-tshut-polarity = <0>;