[RESEND2 PATCH v5 0/3] Add Radxa CM5 module and IO board dts

[FUKAUMI Naoki]

Hi all,

I sincerely hope the following will be helpful in your review.
  https://github.com/RadxaNaoki/linux/blob/cm5-io-v999-20251201/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
  https://github.com/RadxaNaoki/linux/blob/cm5-io-v999-20251201/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts

Also, if you have a CM5 IO Board and require U-Boot, here you go:
  https://github.com/RadxaNaoki/u-boot/tree/cm5-io-v2025.10

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

On 12/2/25 17:40, FUKAUMI Naoki wrote:
> This patch series adds initial device tree support for the Radxa CM5 SoM
> and accompanying IO board.
> 
> V4 -> V5:
>    Patch (2/3), per Jimmy:
>    - Alias eMMC to mmc0
>    - Remove unused sdio alias
>    - Move gmac, hdmi0 nodes to carrier board dts
> 
>    Patch (3/3), per Jimmy:
>    - Enable hdmi0_sound and i2s5_8ch
>    - Remove redundant enablement of sdhci
>    - Enable usb_host2_xhci
> 
>    - Tested HDMI audio
> 
> V3 -> V4:
>    - Fixed XHCI initialization bug by changing try-power-role from source
>      to sink
> 
> V2 -> V3:
>    - Addressed YAML syntax error in dt binding (per Rob)
>    - Fixed whitespace issue in dts reported by checkpatch.pl
>    - Split base SoM and carrier board into separate patches
>    - Added further details about the SoM and carrier to the commit
>      messages
> 
> V1 -> V2:
>    - Added copyright header and data sheet links
>    - Removed non-existent property
>    - Sorted alphabetically
>    - Removed errant whitespace
>    - Moved status to the end of each node
>    - Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
>    - Removed delays from gmac with internal delay
> 
> - Link to v4: https://lore.kernel.org/r/20250605-rk3588s-cm5-io-dts-upstream-v4-0-8445db5ca6b0@gmail.com
> 
> Joseph Kogut (3):
>    dt-bindings: arm: rockchip: Add Radxa CM5 IO board
>    arm64: dts: rockchip: Add rk3588 based Radxa CM5
>    arm64: dts: rockchip: Add support for CM5 IO carrier
> 
>   .../devicetree/bindings/arm/rockchip.yaml     |   7 +
>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>   .../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 486 ++++++++++++++++++
>   .../boot/dts/rockchip/rk3588s-radxa-cm5.dtsi  | 135 +++++
>   4 files changed, 629 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5-io.dts
>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi