[PATCH 3/3] arm64: dts: rockchip: Add ArmSoM W3 board

[Krzysztof Kozlowski]

On 18/09/2024 18:50, Jianfeng Liu wrote:
> W3 is the carrier board for LM7 System on Module.
> 
> W3 features:
> - 1x 2.5GbE Realtek RTL8125 Ethernet
> - 2x HDMI Type A out
> - 1x HDMI Type A in
> - 1x USB 3.1 Type C
> - 2x USB 2.0 Type A
> - 2x USB 3.0 Type A
> - 1x PCIE 2.0 M.2 E Key (1 lane)
> - 1x PCIE 3.0 PCIe (4 lanes)
> - 1x TF scard slot
> - 1x MIPI CSI
> - 1x MIPI DSI
> - 1x ES8316 audio jack
> - 1x FAN connector
> - 1x RTC
> - 40-pin expansion header
> 
> Add support for ArmSoM LM7 board.
> 
> Signed-off-by: Jianfeng Liu <liujianfeng1994 at gmail.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3588-armsom-w3.dts    | 408 ++++++++++++++++++
>  2 files changed, 409 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 09423070c99..b0ed12f41f0 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-w3.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
> new file mode 100644
> index 00000000000..321a44f081c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-armsom-w3.dts
> @@ -0,0 +1,408 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include "rk3588-armsom-lm7.dtsi"
> +
> +/ {
> +	model = "ArmSoM W3";
> +	compatible = "armsom,w3", "armsom,lm7", "rockchip,rk3588";
> +
> +	aliases {
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	analog-sound {
> +		compatible = "audio-graph-card";
> +		label = "rk3588-es8316";
> +
> +		widgets = "Microphone", "Mic Jack",
> +			  "Headphone", "Headphones";
> +
> +		routing = "MIC2", "Mic Jack",
> +			  "Headphones", "HPOL",
> +			  "Headphones", "HPOR";
> +
> +		dais = <&i2s0_8ch_p0>;
> +		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hp_detect>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&led_rgb_b>;
> +
> +		led_rgb_b {

Please no underscores in node names.

> +			function = LED_FUNCTION_STATUS;
> +			color = <LED_COLOR_ID_BLUE>;
> +			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +



Best regards,
Krzysztof