[PATCH v7 4/8] leds: add driver for LEDs from qnap-mcu devices
Heiko Stuebner
heiko at sntech.de
Thu Sep 5 11:52:28 PDT 2024
This adds a driver that connects to the qnap-mcu mfd driver and provides
access to the LEDs on it.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
MAINTAINERS | 1 +
drivers/leds/Kconfig | 11 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-qnap-mcu.c | 227 +++++++++++++++++++++++++++++++++++
4 files changed, 240 insertions(+)
create mode 100644 drivers/leds/leds-qnap-mcu.c
diff --git a/MAINTAINERS b/MAINTAINERS
index ee6e98ba2e6f..943905cbcf62 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18682,6 +18682,7 @@ F: drivers/media/tuners/qm1d1c0042*
QNAP MCU DRIVER
M: Heiko Stuebner <heiko at sntech.de>
S: Maintained
+F: drivers/leds/leds-qnap-mcu.c
F: drivers/mfd/qnap-mcu.c
F: include/linux/qnap-mcu.h
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 8d9d8da376e4..9a337478dd80 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -580,6 +580,17 @@ config LEDS_PCA995X
LED driver chips accessed via the I2C bus. Supported
devices include PCA9955BTW, PCA9952TW and PCA9955TW.
+config LEDS_QNAP_MCU
+ tristate "LED Support for QNAP MCU controllers"
+ depends on LEDS_CLASS
+ depends on MFD_QNAP_MCU
+ help
+ This option enables support for LEDs available on embedded
+ controllers used in QNAP NAS devices.
+
+ This driver can also be built as a module. If so, the module
+ will be called qnap-mcu-leds.
+
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 18afbb5a23ee..c6f74865d729 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_PCA995X) += leds-pca995x.o
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-$(CONFIG_LEDS_QNAP_MCU) += leds-qnap-mcu.o
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o
diff --git a/drivers/leds/leds-qnap-mcu.c b/drivers/leds/leds-qnap-mcu.c
new file mode 100644
index 000000000000..4e4709456261
--- /dev/null
+++ b/drivers/leds/leds-qnap-mcu.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for LEDs found on QNAP MCU devices
+ *
+ * Copyright (C) 2024 Heiko Stuebner <heiko at sntech.de>
+ */
+
+#include <linux/leds.h>
+#include <linux/mfd/qnap-mcu.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+enum qnap_mcu_err_led_mode {
+ QNAP_MCU_ERR_LED_ON = 0,
+ QNAP_MCU_ERR_LED_OFF = 1,
+ QNAP_MCU_ERR_LED_BLINK_FAST = 2,
+ QNAP_MCU_ERR_LED_BLINK_SLOW = 3,
+};
+
+struct qnap_mcu_err_led {
+ struct qnap_mcu *mcu;
+ struct led_classdev cdev;
+ char name[LED_MAX_NAME_SIZE];
+ u8 num;
+ u8 mode;
+};
+
+static inline struct qnap_mcu_err_led *
+ cdev_to_qnap_mcu_err_led(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct qnap_mcu_err_led, cdev);
+}
+
+static int qnap_mcu_err_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev);
+ u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' };
+
+ /* Don't disturb a possible set blink-mode if LED stays on */
+ if (brightness != 0 && err_led->mode >= QNAP_MCU_ERR_LED_BLINK_FAST)
+ return 0;
+
+ err_led->mode = brightness ? QNAP_MCU_ERR_LED_ON : QNAP_MCU_ERR_LED_OFF;
+ cmd[3] = '0' + err_led->mode;
+
+ return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd));
+}
+
+static int qnap_mcu_err_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev);
+ u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' };
+
+ /* LED is off, nothing to do */
+ if (err_led->mode == QNAP_MCU_ERR_LED_OFF)
+ return 0;
+
+ if (*delay_on < 500) {
+ *delay_on = 100;
+ *delay_off = 100;
+ err_led->mode = QNAP_MCU_ERR_LED_BLINK_FAST;
+ } else {
+ *delay_on = 500;
+ *delay_off = 500;
+ err_led->mode = QNAP_MCU_ERR_LED_BLINK_SLOW;
+ }
+
+ cmd[3] = '0' + err_led->mode;
+
+ return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd));
+}
+
+static int qnap_mcu_register_err_led(struct device *dev, struct qnap_mcu *mcu, int num_err_led)
+{
+ struct qnap_mcu_err_led *err_led;
+ int ret;
+
+ err_led = devm_kzalloc(dev, sizeof(*err_led), GFP_KERNEL);
+ if (!err_led)
+ return -ENOMEM;
+
+ err_led->mcu = mcu;
+ err_led->num = num_err_led;
+ err_led->mode = QNAP_MCU_ERR_LED_OFF;
+
+ scnprintf(err_led->name, LED_MAX_NAME_SIZE, "hdd%d:red:status", num_err_led + 1);
+ err_led->cdev.name = err_led->name;
+
+ err_led->cdev.brightness_set_blocking = qnap_mcu_err_led_set;
+ err_led->cdev.blink_set = qnap_mcu_err_led_blink_set;
+ err_led->cdev.brightness = 0;
+ err_led->cdev.max_brightness = 1;
+
+ ret = devm_led_classdev_register(dev, &err_led->cdev);
+ if (ret)
+ return ret;
+
+ return qnap_mcu_err_led_set(&err_led->cdev, 0);
+}
+
+enum qnap_mcu_usb_led_mode {
+ QNAP_MCU_USB_LED_ON = 1,
+ QNAP_MCU_USB_LED_OFF = 3,
+ QNAP_MCU_USB_LED_BLINK = 2,
+};
+
+struct qnap_mcu_usb_led {
+ struct qnap_mcu *mcu;
+ struct led_classdev cdev;
+ u8 mode;
+};
+
+static inline struct qnap_mcu_usb_led *
+ cdev_to_qnap_mcu_usb_led(struct led_classdev *led_cdev)
+{
+ return container_of(led_cdev, struct qnap_mcu_usb_led, cdev);
+}
+
+static int qnap_mcu_usb_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev);
+ u8 cmd[] = { '@', 'C', 0 };
+
+ /* Don't disturb a possible set blink-mode if LED stays on */
+ if (brightness != 0 && usb_led->mode == QNAP_MCU_USB_LED_BLINK)
+ return 0;
+
+ usb_led->mode = brightness ? QNAP_MCU_USB_LED_ON : QNAP_MCU_USB_LED_OFF;
+
+ /*
+ * Byte 3 is shared between the usb led target on/off/blink
+ * and also the buzzer control (in the input driver)
+ */
+ cmd[2] = 'D' + usb_led->mode;
+
+ return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd));
+}
+
+static int qnap_mcu_usb_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev);
+ u8 cmd[] = { '@', 'C', 0 };
+
+ /* LED is off, nothing to do */
+ if (usb_led->mode == QNAP_MCU_USB_LED_OFF)
+ return 0;
+
+ *delay_on = 250;
+ *delay_off = 250;
+ usb_led->mode = QNAP_MCU_USB_LED_BLINK;
+
+ /*
+ * Byte 3 is shared between the USB LED target on/off/blink
+ * and also the buzzer control (in the input driver)
+ */
+ cmd[2] = 'D' + usb_led->mode;
+
+ return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd));
+}
+
+static int qnap_mcu_register_usb_led(struct device *dev, struct qnap_mcu *mcu)
+{
+ struct qnap_mcu_usb_led *usb_led;
+ int ret;
+
+ usb_led = devm_kzalloc(dev, sizeof(*usb_led), GFP_KERNEL);
+ if (!usb_led)
+ return -ENOMEM;
+
+ usb_led->mcu = mcu;
+ usb_led->mode = QNAP_MCU_USB_LED_OFF;
+ usb_led->cdev.name = "usb:blue:disk";
+ usb_led->cdev.brightness_set_blocking = qnap_mcu_usb_led_set;
+ usb_led->cdev.blink_set = qnap_mcu_usb_led_blink_set;
+ usb_led->cdev.brightness = 0;
+ usb_led->cdev.max_brightness = 1;
+
+ ret = devm_led_classdev_register(dev, &usb_led->cdev);
+ if (ret)
+ return ret;
+
+ return qnap_mcu_usb_led_set(&usb_led->cdev, 0);
+}
+
+static int qnap_mcu_leds_probe(struct platform_device *pdev)
+{
+ struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+ const struct qnap_mcu_variant *variant = pdev->dev.platform_data;
+ int ret;
+
+ for (int i = 0; i < variant->num_drives; i++) {
+ ret = qnap_mcu_register_err_led(&pdev->dev, mcu, i);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to register error LED %d\n", i);
+ }
+
+ if (variant->usb_led) {
+ ret = qnap_mcu_register_usb_led(&pdev->dev, mcu);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to register USB LED\n");
+ }
+
+ return 0;
+}
+
+static struct platform_driver qnap_mcu_leds_driver = {
+ .probe = qnap_mcu_leds_probe,
+ .driver = {
+ .name = "qnap-mcu-leds",
+ },
+};
+module_platform_driver(qnap_mcu_leds_driver);
+
+MODULE_ALIAS("platform:qnap-mcu-leds");
+MODULE_AUTHOR("Heiko Stuebner <heiko at sntech.de>");
+MODULE_DESCRIPTION("QNAP MCU LEDs driver");
+MODULE_LICENSE("GPL");
--
2.43.0
More information about the Linux-rockchip
mailing list