[PATCH] arm64: dts: rockchip: add workaround for microSD card detection on Radxa ROCK 3A

[Heiko Stübner]

Hi,

Am Dienstag, 3. September 2024, 10:55:50 CEST schrieb FUKAUMI Naoki:
> Radxa ROCK 3A doesn't detect microSD card insertion/removal correctly.
> it happens from Linux v5.19 to v6.11-rc6.
> 
> add workaround (broken-cd property) to make CD work.
> 
> Fixes: 22a442e6586c ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>

before going for such drastic measures as broken-cd, can you describe how
you checked the card insert/removal ?


I.e. in the dts node below we have both cd-gpios as well as the sdmmc0_det
pinctrl which would set the pinfunc 1 ... the hw-based card detect and
possibly override the cd-gpios?

What happens if you just remove the sdmmc0_det and keep the cd-gpios
property? 

Also, what does cat /sys/kernel/debug/gpio report after that change
with inserted and removed cards?


Heiko

> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index 59f1403b4fa5..89599258ef9c 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -722,12 +722,12 @@ &sdhci {
>  };
>  
>  &sdmmc0 {
> +	broken-cd;
>  	bus-width = <4>;
>  	cap-sd-highspeed;
> -	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
>  	disable-wp;
>  	pinctrl-names = "default";
> -	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
>  	sd-uhs-sdr50;
>  	vmmc-supply = <&vcc3v3_sd>;
>  	vqmmc-supply = <&vccio_sd>;
>