[can-next,v3,00/20] can: rockchip_canfd: add support for CAN-FD IP core found on Rockchip RK3568

[Marc Kleine-Budde]

On 02.09.2024 06:28:37, Alibek Omarov wrote:
> >The IP core is a bit complicated and has several documented errata.
> >The driver is added in several stages, first the base driver including
> >the RX-path. Then several workarounds for errata and the TX-path, and
> >finally features like hardware time stamping, loop-back mode and
> >bus error reporting.
> 
> We've tried this on v2, with a custom board with Radxa CM3I connected and
> it's even more stable than BSP driver we backported ourselves.
> 
> Tested-by: Alibek Omarov <a1ba.omarov at gmail.com>

Thanks for testing.

Are you using the CAN in production devices? The driver runs quite good
on a v3 chip, but still not stable on the v2. But as our customer now
only uses v3, I don't have any more time left to fix v2 issues. Drop me
a note, if you have issues with the v2 chip.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240902/63e315e7/attachment.sig>