[PATCH 1/2] arm64: dts: rockchip: add HDMI support to rk3588-tiger-haikou

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner at cherry.de>

The Haikou baseboard has an hdmi output port, which is connected
via the Q7 connector to the hdmi0 controller of the rk3588.

Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.

Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
---
 .../boot/dts/rockchip/rk3588-tiger-haikou.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
index e4b7a0a4444b..e3596341b816 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-tiger.dtsi"
 
 / {
@@ -61,6 +62,17 @@ switch-lid-btn-n {
 		};
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	i2s3-sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -155,6 +167,29 @@ &gmac0 {
 	status = "okay";
 };
 
+&hdmi0 {
+	/* No CEC on Haikou */
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim1_tx0_scl &hdmim1_tx0_sda>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -321,3 +356,18 @@ &usb_host1_xhci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
-- 
2.45.2