[PATCH 3/3] arm64: dts: rockchip: Add new SoC dtsi for the RK3566T variant
Dragan Simic
dsimic at manjaro.org
Tue Oct 22 13:13:04 PDT 2024
Hello Fukaumi and Tom,
On 2024-10-14 07:16, Dragan Simic wrote:
> On 2024-10-14 06:38, FUKAUMI Naoki wrote:
>> On 10/13/24 02:04, Dragan Simic wrote:
>>> Add new SoC dtsi file for the RK3566T variant of the Rockchip RK3566
>>> SoC.
>>> The difference between the RK3566T variant and the "full-fat" RK3566
>>> variant
>>> is in fewer supported CPU and GPU OPPs on the RK3566T, and in the
>>> absence of
>>> a functional NPU, which we currently don't have to worry about.
>>>
>>> Examples of the boards based on the RK3566T include the Pine64
>>> Quartz64 Zero
>>> SBC, [2] the Radxa ROCK 3C and the Radxa ZERO 3E/3W SBCs.
>>> Unfortunately,
>>> Radxa doesn't mention the use of RK3566T officially, but its official
>>> SBC
>>> specifications do state that the maximum frequency for the Cortex-A55
>>> cores
>>> on those SBCs is lower than the "full-fat" RK3566's 1.8 GHz, which
>>> makes
>>> spotting the presence of the RK3566T SoC variant rather easy.
>>> [3][4][5] An
>>> additional, helpful cue is that Radxa handles the CPU and GPU OPPs
>>> for the
>>> RK3566T variant separately in its downstream kernel. [6]
>>>
>>> The CPU and GPU OPPs supported on the RK3566T SoC variant are taken
>>> from the
>>> vendor kernel source, [1] which uses the values of the
>>> "opp-supported-hw" OPP
>>> properties to determine which ones are supported on a particular SoC
>>> variant.
>>> The actual values of the "opp-supported-hw" properties make it rather
>>> easy
>>> to see what OPPs are supported on the RK3566T SoC variant, but that,
>>> rather
>>> unfortunately, clashes with the maximum frequencies advertised
>>> officially
>>> for the Cortex-A55 CPU cores on the above-mentioned SBCs.
>>> [2][3][4][5] The
>>> vendor kernel source indicates that the maximum frequency for the CPU
>>> cores
>>> is 1.4 GHz, while the SBC specifications state that to be 1.6 GHz.
>>> Unless
>>> that discrepancy is resolved somehow, let's take the safe approach
>>> and use
>>> the lower maximum frequency for the CPU cores.
>>>
>>> Update the dts files of the currently supported RK3566T-based boards
>>> to use
>>> the new SoC dtsi for the RK3566T variant. This actually takes the
>>> CPU cores
>>> and the GPUs found on these boards out of their earlier overclocks,
>>> but it
>>> also means that the officially advertised specifications [2][3][4][5]
>>> of the
>>> highest supported frequencies for the Cortex-A55 CPU cores on these
>>> boards
>>> may actually be wrong, as already explained above.
>>>
>>> The correctness of the introduced changes was validated by
>>> decompiling and
>>> comparing all affected board dtb files before and after these
>>> changes.
>>>
>>> [1]
>>> https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi
>>> [2] https://wiki.pine64.org/wiki/Quartz64
>>> [3]
>>> https://dl.radxa.com/rock3/docs/hw/3c/radxa_rock3c_product_brief.pdf
>>> [4]
>>> https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_product_brief.pdf
>>> [5]
>>> https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_product_brief.pdf
>>> [6]
>>> https://github.com/radxa/kernel/commit/2dfd51da472e7ebb5ef0d3db78f902454af826b8
>>>
>>> Cc: TL Lim <tllim at pine64.org>
>>> Cc: Marek Kraus <gamiee at pine64.org>
>>> Cc: Tom Cubie <tom at radxa.com>
>>> Cc: FUKAUMI Naoki <naoki at radxa.com>
>>> Helped-by: Nicolas Frattaroli <frattaroli.nicolas at gmail.com>
>>> Helped-by: Jonas Karlman <jonas at kwiboo.se>
>>> Signed-off-by: Dragan Simic <dsimic at manjaro.org>
>>> ---
>>> .../dts/rockchip/rk3566-radxa-zero-3.dtsi | 2 +-
>>> .../boot/dts/rockchip/rk3566-rock-3c.dts | 2 +-
>>> arch/arm64/boot/dts/rockchip/rk3566t.dtsi | 90
>>> +++++++++++++++++++
>>> 3 files changed, 92 insertions(+), 2 deletions(-)
>>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3566t.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
>>> b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
>>> index de390d92c35e..1ee5d96a46a1 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi
>>> @@ -3,7 +3,7 @@
>>> #include <dt-bindings/gpio/gpio.h>
>>> #include <dt-bindings/leds/common.h>
>>> #include <dt-bindings/soc/rockchip,vop2.h>
>>> -#include "rk3566.dtsi"
>>> +#include "rk3566t.dtsi"
>>
>> could you drop this change for now?
>
> This patch is also going to be used for the upcoming board dts
> for the Pine64 Quartz64 Zero, so there's no need for dropping it.
> The Quartz64 Zero definitely uses the RK3566T.
>
>> We (Radxa) think we use RK3566.
>
> Well, the available documentation for the Radxa ROCK 3C and ZERO
> 3E/3W boards doesn't say so; instead, everything points to the
> RK3566T being used. The referenced commit in the Radxa downstream
> kernel also indicates that RK3566T is used at least on some boards.
>
> Also, some independent testing, by reading the efuses, has showed
> that at least some ROCK 3C and ZERO 3E/3W boards actually have the
> RK3566T, which means that we should handle them all as having the
> RK3566T, to avoid overclocking the CPU cores and the GPU. I'll
> get back to this below.
>
>> and vendor kernel[6] refers efuse value to determine it's -T or not.
>> can you do similar way?
>
> Unfortunately not at the moment, because that would require major
> changes to the way OPPs are handled in the upstream kernel. Maybe
> we can do that at some point in the future, as part of my planned
> work on supporting SoC binning.
>
> With that in place, hopefully, we could handle any ROCK 3C and ZERO
> 3E/3W boards that actually have the "full-fat" RK3566 variant as
> such, but until then, it's much safer to treat them all as having
> the RK3566T, and avoid the possible overclocking.
Just checking, and having the subsequent discussion on IRC in mind,
are you fine with the above-proposed approach? Please let me know
if some further clarification is needed.
>>> / {
>>> chosen {
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
>>> b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
>>> index f2cc086e5001..9a8f4f774dbc 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
>>> @@ -5,7 +5,7 @@
>>> #include <dt-bindings/leds/common.h>
>>> #include <dt-bindings/pinctrl/rockchip.h>
>>> #include <dt-bindings/soc/rockchip,vop2.h>
>>> -#include "rk3566.dtsi"
>>> +#include "rk3566t.dtsi"
>>
>> same here.
>>
>>> / {
>>> model = "Radxa ROCK 3C";
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3566t.dtsi
>>> b/arch/arm64/boot/dts/rockchip/rk3566t.dtsi
>>> new file mode 100644
>>> index 000000000000..cd89bd3b125b
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3566t.dtsi
>>> @@ -0,0 +1,90 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>>> +
>>> +#include "rk3566-base.dtsi"
>>> +
>>> +/ {
>>> + cpu0_opp_table: opp-table-0 {
>>> + compatible = "operating-points-v2";
>>> + opp-shared;
>>> +
>>> + opp-408000000 {
>>> + opp-hz = /bits/ 64 <408000000>;
>>> + opp-microvolt = <850000 850000 1150000>;
>>> + clock-latency-ns = <40000>;
>>> + };
>>> +
>>> + opp-600000000 {
>>> + opp-hz = /bits/ 64 <600000000>;
>>> + opp-microvolt = <850000 850000 1150000>;
>>> + clock-latency-ns = <40000>;
>>> + };
>>> +
>>> + opp-816000000 {
>>> + opp-hz = /bits/ 64 <816000000>;
>>> + opp-microvolt = <850000 850000 1150000>;
>>> + clock-latency-ns = <40000>;
>>> + opp-suspend;
>>> + };
>>> +
>>> + opp-1104000000 {
>>> + opp-hz = /bits/ 64 <1104000000>;
>>> + opp-microvolt = <900000 900000 1150000>;
>>> + clock-latency-ns = <40000>;
>>> + };
>>> +
>>> + opp-1416000000 {
>>> + opp-hz = /bits/ 64 <1416000000>;
>>> + opp-microvolt = <1025000 1025000 1150000>;
>>> + clock-latency-ns = <40000>;
>>> + };
>>> + };
>>> +
>>> + gpu_opp_table: opp-table-1 {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp-200000000 {
>>> + opp-hz = /bits/ 64 <200000000>;
>>> + opp-microvolt = <850000 850000 1000000>;
>>> + };
>>> +
>>> + opp-300000000 {
>>> + opp-hz = /bits/ 64 <300000000>;
>>> + opp-microvolt = <850000 850000 1000000>;
>>> + };
>>> +
>>> + opp-400000000 {
>>> + opp-hz = /bits/ 64 <400000000>;
>>> + opp-microvolt = <850000 850000 1000000>;
>>> + };
>>> +
>>> + opp-600000000 {
>>> + opp-hz = /bits/ 64 <600000000>;
>>> + opp-microvolt = <900000 900000 1000000>;
>>> + };
>>> +
>>> + opp-700000000 {
>>> + opp-hz = /bits/ 64 <700000000>;
>>> + opp-microvolt = <950000 950000 1000000>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&cpu0 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> +};
>>> +
>>> +&cpu1 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> +};
>>> +
>>> +&cpu2 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> +};
>>> +
>>> +&cpu3 {
>>> + operating-points-v2 = <&cpu0_opp_table>;
>>> +};
>>> +
>>> +&gpu {
>>> + operating-points-v2 = <&gpu_opp_table>;
>>> +};
More information about the Linux-rockchip
mailing list