[PATCH v3 10/12] PCI: rockchip-ep: Improve link training

[Damien Le Moal]

On 10/10/24 19:35, Manivannan Sadhasivam wrote:
>> +static void rockchip_pcie_ep_link_training(struct work_struct *work)
>> +{
>> +	struct rockchip_pcie_ep *ep =
>> +		container_of(work, struct rockchip_pcie_ep, link_training.work);
>> +	struct rockchip_pcie *rockchip = &ep->rockchip;
>> +	struct device *dev = rockchip->dev;
>> +	u32 val;
>> +	int ret;
>> +
>> +	/* Enable Gen1 training and wait for its completion */
>> +	ret = readl_poll_timeout(rockchip->apb_base + PCIE_CORE_CTRL,
>> +				 val, PCIE_LINK_TRAINING_DONE(val), 50,
>> +				 LINK_TRAIN_TIMEOUT);
>> +	if (ret)
>> +		goto again;
>> +
>> +	/* Make sure that the link is up */
>> +	ret = readl_poll_timeout(rockchip->apb_base + PCIE_CLIENT_BASIC_STATUS1,
>> +				 val, PCIE_LINK_UP(val), 50,
>> +				 LINK_TRAIN_TIMEOUT);
>> +	if (ret)
>> +		goto again;
>> +
>> +	/* Check the current speed */
>> +	val = rockchip_pcie_read(rockchip, PCIE_CORE_CTRL);
>> +	if (!PCIE_LINK_IS_GEN2(val) && rockchip->link_gen == 2) {
> 
> PCIE_LINK_IS_GEN2()?

This is defined in drivers/pci/controller/pcie-rockchip.h. What is it exactly
you would like to know about this ?

> 
>> +		/* Enable retrain for gen2 */
>> +		rockchip_pcie_ep_retrain_link(rockchip);
>> +		readl_poll_timeout(rockchip->apb_base + PCIE_CORE_CTRL,
>> +				   val, PCIE_LINK_IS_GEN2(val), 50,
>> +				   LINK_TRAIN_TIMEOUT);
>> +	}
>> +
>> +	/* Check again that the link is up */
>> +	if (!rockchip_pcie_ep_link_up(rockchip))
>> +		goto again;
> 
> TRM doesn't mention this check. Is this really necessary?

I think so, to check the result of the second training for gen2.
Even though the TRM does not say so, I prefer checking that the result is what
we expect: the link is up.

-- 
Damien Le Moal
Western Digital Research