[PATCH v2 07/14] arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc

[Dragan Simic]

Hello Heiko,

On 2024-10-08 22:39, Heiko Stuebner wrote:
> There are two LEDs on the board, power and user events.
> Currently both are assigned undocumented IR(-remote)
> triggers that are probably only part of the vendor-kernel.
> 
> To make dtbs check happier, assign the power-led to a generic
> default-on trigger and the user led to the documented rc-feedback
> trigger that should mostly match its current usage.
> 
> Fixes: 4403e1237be3 ("arm64: dts: rockchip: Add devicetree for board
> roc-rk3308-cc")
> Cc: Andy Yan <andy.yan at rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>

Looking rather meh to me, but I guess that's as good as it gets.
Thanks for the patch.

Reviewed-by: Dragan Simic <dsimic at manjaro.org>

> ---
>  arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
> b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
> index 9232357f4fec..d9e191ad1d77 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
> @@ -36,14 +36,14 @@ leds {
> 
>  		power_led: led-0 {
>  			label = "firefly:red:power";
> -			linux,default-trigger = "ir-power-click";
> +			linux,default-trigger = "default-on";
>  			default-state = "on";
>  			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
>  		};
> 
>  		user_led: led-1 {
>  			label = "firefly:blue:user";
> -			linux,default-trigger = "ir-user-click";
> +			linux,default-trigger = "rc-feedback";
>  			default-state = "off";
>  			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
>  		};