[PATCH 1/3] drm/bridge/synopsys: Add MIPI DSI2 host controller bridge
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Wed Nov 6 05:54:39 PST 2024
Hi,
On 06/11/2024 13:33, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
>
> Add a Synopsys Designware MIPI DSI host DRM bridge driver for their
> DSI2 host controller, based on the Rockchip version from the driver
> rockchip/dw-mipi-dsi2.c in their vendor-kernel with phy & bridge APIs.
>
> While the driver is heavily modelled after the previous IP, the register
> set of this DSI2 controller is completely different and there are also
> additional properties like the variable-width phy interface.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> ---
> drivers/gpu/drm/bridge/synopsys/Kconfig | 6 +
> drivers/gpu/drm/bridge/synopsys/Makefile | 1 +
> .../gpu/drm/bridge/synopsys/dw-mipi-dsi2.c | 1034 +++++++++++++++++
> include/drm/bridge/dw_mipi_dsi2.h | 94 ++
> 4 files changed, 1135 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c
> create mode 100644 include/drm/bridge/dw_mipi_dsi2.h
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index ca416dab156d..f3ab2f985f8c 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -59,3 +59,9 @@ config DRM_DW_MIPI_DSI
> select DRM_KMS_HELPER
> select DRM_MIPI_DSI
> select DRM_PANEL_BRIDGE
> +
> +config DRM_DW_MIPI_DSI2
> + tristate
> + select DRM_KMS_HELPER
> + select DRM_MIPI_DSI
> + select DRM_PANEL_BRIDGE
> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
> index 9869d9651ed1..9dc376d220ad 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_DRM_DW_HDMI_CEC) += dw-hdmi-cec.o
> obj-$(CONFIG_DRM_DW_HDMI_QP) += dw-hdmi-qp.o
>
> obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
> +obj-$(CONFIG_DRM_DW_MIPI_DSI2) += dw-mipi-dsi2.o
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c
> new file mode 100644
> index 000000000000..43738fe3cb93
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c
> @@ -0,0 +1,1034 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2024, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Modified by Heiko Stuebner <heiko.stuebner at cherry.de>
> + * This generic Synopsys DesignWare MIPI DSI2 host driver is based on the
> + * Rockchip version from rockchip/dw-mipi-dsi2.c converted to use bridge APIs.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/bridge/dw_mipi_dsi2.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_print.h>
> +
> +#define UPDATE(v, h, l) (((v) << (l)) & GENMASK((h), (l)))
I'm not super fan of this macro, overall I thinkg you should switch to
regmap and make use of regmap_update_bits and drop dsi2_write/read wrappers
to readl/writel.
> +
> +#define DSI2_PWR_UP 0x000c
> +#define RESET 0
> +#define POWER_UP BIT(0)
> +#define CMD_TX_MODE(x) UPDATE(x, 24, 24)
> +#define DSI2_SOFT_RESET 0x0010
> +#define SYS_RSTN BIT(2)
> +#define PHY_RSTN BIT(1)
> +#define IPI_RSTN BIT(0)
> +#define INT_ST_MAIN 0x0014
> +#define DSI2_MODE_CTRL 0x0018
> +#define DSI2_MODE_STATUS 0x001c
> +#define DSI2_CORE_STATUS 0x0020
> +#define PRI_RD_DATA_AVAIL BIT(26)
> +#define PRI_FIFOS_NOT_EMPTY BIT(25)
> +#define PRI_BUSY BIT(24)
> +#define CRI_RD_DATA_AVAIL BIT(18)
> +#define CRT_FIFOS_NOT_EMPTY BIT(17)
> +#define CRI_BUSY BIT(16)
> +#define IPI_FIFOS_NOT_EMPTY BIT(9)
> +#define IPI_BUSY BIT(8)
> +#define CORE_FIFOS_NOT_EMPTY BIT(1)
> +#define CORE_BUSY BIT(0)
> +#define MANUAL_MODE_CFG 0x0024
> +#define MANUAL_MODE_EN BIT(0)
> +#define DSI2_TIMEOUT_HSTX_CFG 0x0048
> +#define TO_HSTX(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_HSTXRDY_CFG 0x004c
> +#define TO_HSTXRDY(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_LPRX_CFG 0x0050
> +#define TO_LPRXRDY(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_LPTXRDY_CFG 0x0054
> +#define TO_LPTXRDY(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_LPTXTRIG_CFG 0x0058
> +#define TO_LPTXTRIG(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_LPTXULPS_CFG 0x005c
> +#define TO_LPTXULPS(x) UPDATE(x, 15, 0)
> +#define DSI2_TIMEOUT_BTA_CFG 0x60
> +#define TO_BTA(x) UPDATE(x, 15, 0)
> +
<snip>
> +
> +static struct dw_mipi_dsi2 *
> +__dw_mipi_dsi2_probe(struct platform_device *pdev,
> + const struct dw_mipi_dsi2_plat_data *plat_data)
> +{
> + struct device *dev = &pdev->dev;
> + struct reset_control *apb_rst;
> + struct dw_mipi_dsi2 *dsi2;
> + int ret;
> +
> + dsi2 = devm_kzalloc(dev, sizeof(*dsi2), GFP_KERNEL);
> + if (!dsi2)
> + return ERR_PTR(-ENOMEM);
> +
> + dsi2->dev = dev;
> + dsi2->plat_data = plat_data;
> +
> + if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps ||
> + !plat_data->phy_ops->get_timing)
> + return dev_err_ptr_probe(dev, -ENODEV, "Phy not properly configured\n");
> +
> + if (!plat_data->base) {
> + dsi2->base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dsi2->base))
> + return ERR_PTR(-ENODEV);
> + } else {
> + dsi2->base = plat_data->base;
> + }
> +
> + dsi2->pclk = devm_clk_get(dev, "pclk");
> + if (IS_ERR(dsi2->pclk))
> + return dev_err_cast_probe(dev, dsi2->pclk, "Unable to get pclk\n");
> +
> + dsi2->sys_clk = devm_clk_get(dev, "sys");
> + if (IS_ERR(dsi2->sys_clk))
> + return dev_err_cast_probe(dev, dsi2->sys_clk, "Unable to get sys_clk\n");
> +
> + /*
> + * Note that the reset was not defined in the initial device tree, so
> + * we have to be prepared for it not being found.
> + */
> + apb_rst = devm_reset_control_get_optional_exclusive(dev, "apb");
> + if (IS_ERR(apb_rst))
> + return dev_err_cast_probe(dev, apb_rst, "Unable to get reset control\n");
> +
> + if (apb_rst) {
> + ret = clk_prepare_enable(dsi2->pclk);
> + if (ret) {
> + dev_err(dev, "%s: Failed to enable pclk\n", __func__);
> + return ERR_PTR(ret);
> + }
> +
> + reset_control_assert(apb_rst);
> + usleep_range(10, 20);
> + reset_control_deassert(apb_rst);
> +
> + clk_disable_unprepare(dsi2->pclk);
> + }
> +
> + pm_runtime_enable(dev);
> +
> + dsi2->dsi_host.ops = &dw_mipi_dsi2_host_ops;
> + dsi2->dsi_host.dev = dev;
> + ret = mipi_dsi_host_register(&dsi2->dsi_host);
> + if (ret) {
> + dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> + pm_runtime_disable(dev);
> + return ERR_PTR(ret);
> + }
> +
> + dsi2->bridge.driver_private = dsi2;
> + dsi2->bridge.funcs = &dw_mipi_dsi2_bridge_funcs;
> + dsi2->bridge.of_node = pdev->dev.of_node;
> +
> + return dsi2;
> +}
> +
> +static void __dw_mipi_dsi2_remove(struct dw_mipi_dsi2 *dsi2)
> +{
> + mipi_dsi_host_unregister(&dsi2->dsi_host);
> +
> + pm_runtime_disable(dsi2->dev);
> +}
> +
> +/*
> + * Probe/remove API, used from platforms based on the DRM bridge API.
> + */
> +struct dw_mipi_dsi2 *
> +dw_mipi_dsi2_probe(struct platform_device *pdev,
> + const struct dw_mipi_dsi2_plat_data *plat_data)
> +{
> + return __dw_mipi_dsi2_probe(pdev, plat_data);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi2_probe);
> +
> +void dw_mipi_dsi2_remove(struct dw_mipi_dsi2 *dsi2)
> +{
> + __dw_mipi_dsi2_remove(dsi2);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi2_remove);
Since it's not use yet, you should probably drop those since it's dead
code.
> +
> +/*
> + * Bind/unbind API, used from platforms based on the component framework.
> + */
> +int dw_mipi_dsi2_bind(struct dw_mipi_dsi2 *dsi2, struct drm_encoder *encoder)
> +{
> + return drm_bridge_attach(encoder, &dsi2->bridge, NULL, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi2_bind);
> +
> +void dw_mipi_dsi2_unbind(struct dw_mipi_dsi2 *dsi2)
> +{
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi2_unbind);
> +
> +MODULE_AUTHOR("Guochun Huang <hero.huang at rock-chips.com>");
> +MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner at cherry.de>");
> +MODULE_DESCRIPTION("DW MIPI DSI2 host controller driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:dw-mipi-dsi2");
> diff --git a/include/drm/bridge/dw_mipi_dsi2.h b/include/drm/bridge/dw_mipi_dsi2.h
> new file mode 100644
> index 000000000000..ef5479b35028
> --- /dev/null
> +++ b/include/drm/bridge/dw_mipi_dsi2.h
> @@ -0,0 +1,94 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2024, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Authors: Guochun Huang <hero.huang at rock-chips.com>
> + * Heiko Stuebner <heiko.stuebner at cherry.de>
> + */
> +
> +#ifndef __DW_MIPI_DSI2__
> +#define __DW_MIPI_DSI2__
> +
> +#include <linux/types.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_connector.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_modes.h>
> +
> +struct drm_display_mode;
> +struct drm_encoder;
> +struct dw_mipi_dsi2;
> +struct mipi_dsi_device;
> +struct platform_device;
> +
> +enum dw_mipi_dsi2_phy_type {
> + DW_MIPI_DSI2_DPHY,
> + DW_MIPI_DSI2_CPHY,
> +};
> +
> +struct dw_mipi_dsi2_phy_iface {
> + int ppi_width;
> + enum dw_mipi_dsi2_phy_type phy_type;
> +};
> +
> +struct dw_mipi_dsi2_phy_timing {
> + u32 data_hs2lp;
> + u32 data_lp2hs;
> +};
> +
> +struct dw_mipi_dsi2_phy_ops {
> + int (*init)(void *priv_data);
> + void (*power_on)(void *priv_data);
> + void (*power_off)(void *priv_data);
> + void (*get_interface)(void *priv_data, struct dw_mipi_dsi2_phy_iface *iface);
> + int (*get_lane_mbps)(void *priv_data,
> + const struct drm_display_mode *mode,
> + unsigned long mode_flags, u32 lanes, u32 format,
> + unsigned int *lane_mbps);
> + int (*get_timing)(void *priv_data, unsigned int lane_mbps,
> + struct dw_mipi_dsi2_phy_timing *timing);
> + int (*get_esc_clk_rate)(void *priv_data, unsigned int *esc_clk_rate);
> +};
> +
> +struct dw_mipi_dsi2_host_ops {
> + int (*attach)(void *priv_data,
> + struct mipi_dsi_device *dsi);
> + int (*detach)(void *priv_data,
> + struct mipi_dsi_device *dsi);
> +};
> +
> +struct dw_mipi_dsi2_plat_data {
> + void __iomem *base;
> + unsigned int max_data_lanes;
> +
> + enum drm_mode_status (*mode_valid)(void *priv_data,
> + const struct drm_display_mode *mode,
> + unsigned long mode_flags,
> + u32 lanes, u32 format);
> +
> + bool (*mode_fixup)(void *priv_data, const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode);
> +
> + u32 *(*get_input_bus_fmts)(void *priv_data,
> + struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts);
> +
> + const struct dw_mipi_dsi2_phy_ops *phy_ops;
> + const struct dw_mipi_dsi2_host_ops *host_ops;
> +
> + void *priv_data;
> +};
> +
> +struct dw_mipi_dsi2 *dw_mipi_dsi2_probe(struct platform_device *pdev,
> + const struct dw_mipi_dsi2_plat_data *plat_data);
> +void dw_mipi_dsi2_remove(struct dw_mipi_dsi2 *dsi2);
> +int dw_mipi_dsi2_bind(struct dw_mipi_dsi2 *dsi2, struct drm_encoder *encoder);
> +void dw_mipi_dsi2_unbind(struct dw_mipi_dsi2 *dsi2);
> +
> +#endif /* __DW_MIPI_DSI2__ */
Overall the driver is very close to dw-mipi-dsi, si it's overall good!
Thanks,
Neil
More information about the Linux-rockchip
mailing list