[PATCH] arm64: dts: rockchip: quartzpro64: Enable the GPU

[Heiko Stübner]

Hi,

Am Montag, 25. März 2024, 17:19:04 CET schrieb Dragan Simic:
> Following the approach used to enable the Mali GPU on the rk3588-evb1, [1]
> do the same for the Pine64 QuartzPro64, which uses nearly identical hardware
> design as the RK3588 EVB1.
> 
> The slight disadvantage is that the regulator coupling logic requires the
> regulators to be always on, which is also noted in the comments.  This is
> obviously something to be improved at some point in the future, but should
> be fine for now, especially because the QuartzPro64 isn't a battery-powered
> board, so low power consumption isn't paramount.
> 
> [1] https://lore.kernel.org/linux-rockchip/20240325153850.189128-5-sebastian.reichel@collabora.com/
> 
> Signed-off-by: Dragan Simic <dsimic at manjaro.org>

as lore.kernel.org and therefore b4 seems to be on vacation today, you
get a very personal "applied" message ;-) .

So, applied for 6.10 after the core rk3588-gpu-series from Sebastian.


Heiko