[PATCH v2 2/2] arm64: dts: rockchip: Add Radxa ROCK 3B

[Alex Bee]

Am 27.06.24 um 00:29 schrieb FUKAUMI Naoki:
> Hi,
> 
> thank you very much for your effort!
> 
> On 6/27/24 05:14, Jonas Karlman wrote:
>> The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
>> factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
>> version based on the RK3568 SoC and an industrial version based on the
>> RK3568J SoC.
>>
>> Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
>>
>> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
>> ---
>> v2:
>> - Use regulator-.* nodename for fixed regulators
>> - Drop rockchip,mic-in-differential prop
>> - Shorten Ethernet phy reset-deassert-us to 50 ms
>> - Fix pcie pinctrl
>> - Add keep-power-in-suspend to sdmmc2
>>
>> Following issue is reported by dtbs_check and is fixed by series at [1]:
>>
>>    pmic at 20: '#sound-dai-cells', 'assigned-clock-parents', 
>> 'assigned-clocks', 'clock-names', 'clocks'
>>      do not match any of the regexes: 'pinctrl-[0-9]+'
>>    from schema $id: 
>> http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
>>
>> [1] 
>> https://lore.kernel.org/all/20240622-rk809-fixes-v2-0-c0db420d3639@collabora.com/
>> ---
>>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>   .../boot/dts/rockchip/rk3568-rock-3b.dts      | 780 ++++++++++++++++++
>>   2 files changed, 781 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile 
>> b/arch/arm64/boot/dts/rockchip/Makefile
>> index 90f5172f37e6..ae0ae02f51e9 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
>>   dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts 
>> b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
>> new file mode 100644
>> index 000000000000..46c959f1c6ad
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
>> @@ -0,0 +1,780 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/leds/common.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/soc/rockchip,vop2.h>
>> +#include "rk3568.dtsi"
>> +
>> +/ {
>> +    model = "Radxa ROCK 3B";
>> +    compatible = "radxa,rock-3b", "rockchip,rk3568";
>> +
>> +    aliases {
>> +        ethernet0 = &gmac0;
>> +        ethernet1 = &gmac1;
>> +        mmc0 = &sdhci;
>> +        mmc1 = &sdmmc0;
>> +        mmc2 = &sdmmc2;
>> +    };
>> +
>> +    chosen {
>> +        stdout-path = "serial2:1500000n8";
>> +    };
>> +
>> +    hdmi-con {
>> +        compatible = "hdmi-connector";
>> +        type = "a";
>> +
>> +        port {
>> +            hdmi_con_in: endpoint {
>> +                remote-endpoint = <&hdmi_out_con>;
>> +            };
>> +        };
>> +    };
>> +
>> +    ir-receiver {
>> +        compatible = "gpio-ir-receiver";
>> +        gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&pwm3_ir>;
>> +    };
>> +
>> +    leds {
>> +        compatible = "gpio-leds";
>> +
>> +        led-green {
> 
> led-0 or just led (leds-gpio.yaml)
> 
That's a misinterpretation of the pattern-properties regex: The
"non-preferred" part of the regex does neither have a "^" nor an "$", thus
it allows all nodes names which have "led" somewhere.
> Best regards,
> 
> -- 
> FUKAUMI Naoki