[PATCH v3 2/3] arm64: dts: rockchip: prepare common .dtsi for Radxa ROCK Pi E
Dragan Simic
dsimic at manjaro.org
Sun Jun 23 13:51:43 PDT 2024
Hello Fukuami,
On 2024-06-23 22:14, FUKAUMI Naoki wrote:
> Radxa ROCK Pi E v1.2x and ROCK Pi E v3.0 share most of their parts.
> prepare rk3328-rock-pi-e-base.dtsi as a common dtsi for both boards.
>
> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
>
> Changes in v3:
> - move mmc aliases from base to board dts. no functional change
> Changes in v2:
> - include changes for rk3328-rock-pi-e.dts to make dtb buildable
> ---
> .../dts/rockchip/rk3328-rock-pi-e-base.dtsi | 440 ++++++++++++++++++
> .../boot/dts/rockchip/rk3328-rock-pi-e.dts | 432 +----------------
> 2 files changed, 441 insertions(+), 431 deletions(-)
> create mode 100644
> arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
I wonder if this patch could be made much smaller and much more
easier to be reviewed using --break-rewrites [1] as an option for
git-diff(1) and git-format-patch(1)?
[1]
https://git-scm.com/docs/diff-options#Documentation/diff-options.txt--Bltngtltmgt
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
> new file mode 100644
> index 000000000000..1da518fd31fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e-base.dtsi
> @@ -0,0 +1,440 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * (C) Copyright 2020 Chen-Yu Tsai <wens at csie.org>
> + *
> + * Based on ./rk3328-rock64.dts, which is
> + *
> + * Copyright (c) 2017 PINE64
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +
> +#include "rk3328.dtsi"
> +
> +/ {
> + aliases {
> + ethernet0 = &gmac2io;
> + ethernet1 = &gmac2phy;
> + };
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 0>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1750000>;
> +
> + /* This button is unpopulated out of the factory. */
> + button-recovery {
> + label = "Recovery";
> + linux,code = <KEY_VENDOR>;
> + press-threshold-microvolt = <10000>;
> + };
> + };
> +
> + gmac_clkin: external-gmac-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "gmac_clkin";
> + #clock-cells = <0>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&led_pin>;
> + pinctrl-names = "default";
> +
> + led-0 {
> + color = <LED_COLOR_ID_BLUE>;
> + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + vcc_sd: sdmmc-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0m1_pin>;
> + regulator-name = "vcc_sd";
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +
> + vcc_host_5v: vcc-host-5v-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb30_host_drv>;
> + enable-active-high;
> + regulator-name = "vcc_host_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_sys>;
> + };
> +
> + vcc_sys: vcc-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + vcc_wifi: vcc-wifi-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_en>;
> + regulator-name = "vcc_wifi";
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&vcc_io>;
> + };
> +};
> +
> +&analog_sound {
> + status = "okay";
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&emmc {
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + non-removable;
> + pinctrl-names = "default";
> + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> + vmmc-supply = <&vcc_io>;
> + vqmmc-supply = <&vcc18_emmc>;
> + status = "okay";
> +};
> +
> +&gmac2io {
> + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
> + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
> + clock_in_out = "input";
> + phy-handle = <&rtl8211>;
> + phy-mode = "rgmii";
> + phy-supply = <&vcc_io>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rgmiim1_pins>;
> + snps,aal;
> + snps,rxpbl = <0x4>;
> + snps,txpbl = <0x4>;
> + tx_delay = <0x26>;
> + rx_delay = <0x11>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rtl8211: ethernet-phy at 1 {
> + reg = <1>;
> + pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
> + pinctrl-names = "default";
> + interrupt-parent = <&gpio1>;
> + interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
> + reset-assert-us = <10000>;
> + reset-deassert-us = <50000>;
> + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&gmac2phy {
> + status = "okay";
> +};
> +
> +&gpio0 {
> + gpio-line-names =
> + /* GPIO0_A0 - A7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO0_B0 - B7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO0_C0 - C7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO0_D0 - D7 */
> + "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
> +};
> +
> +&gpio1 {
> + gpio-line-names =
> + /* GPIO1_A0 - A7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO1_B0 - B7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO1_C0 - C7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO1_D0 - D7 */
> + "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
> +};
> +
> +&gpio2 {
> + gpio-line-names =
> + /* GPIO2_A0 - A7 */
> + "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
> + "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
> + "pin-33 [GPIO2_A6]", "",
> + /* GPIO2_B0 - B7 */
> + "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
> + /* GPIO2_C0 - C7 */
> + "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
> + "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
> + "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
> + /* GPIO2_D0 - D7 */
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&gpio3 {
> + gpio-line-names =
> + /* GPIO3_A0 - A7 */
> + "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
> + "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
> + /* GPIO3_B0 - B7 */
> + "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
> + /* GPIO3_C0 - C7 */
> + "", "", "", "", "", "", "", "",
> + /* GPIO3_D0 - D7 */
> + "", "", "", "", "", "", "", "";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + rk805: pmic at 18 {
> + compatible = "rockchip,rk805";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + #clock-cells = <1>;
> + clock-output-names = "xin32k", "rk805-clkout2";
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int_l>;
> + rockchip,system-power-controller;
> + wakeup-source;
> +
> + vcc1-supply = <&vcc_sys>;
> + vcc2-supply = <&vcc_sys>;
> + vcc3-supply = <&vcc_sys>;
> + vcc4-supply = <&vcc_sys>;
> + vcc5-supply = <&vcc_io>;
> + vcc6-supply = <&vcc_sys>;
> +
> + regulators {
> + vdd_log: DCDC_REG1 {
> + regulator-name = "vdd_log";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <12500>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vdd_arm: DCDC_REG2 {
> + regulator-name = "vdd_arm";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1450000>;
> + regulator-ramp-delay = <12500>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <950000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_io: DCDC_REG4 {
> + regulator-name = "vcc_io";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_18: LDO_REG1 {
> + regulator-name = "vcc_18";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc18_emmc: LDO_REG2 {
> + regulator-name = "vcc18_emmc";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_10: LDO_REG3 {
> + regulator-name = "vdd_10";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2s1 {
> + status = "okay";
> +};
> +
> +&io_domains {
> + pmuio-supply = <&vcc_io>;
> + vccio1-supply = <&vcc_io>;
> + vccio2-supply = <&vcc18_emmc>;
> + vccio3-supply = <&vcc_io>;
> + vccio4-supply = <&vcc_io>;
> + vccio5-supply = <&vcc_io>;
> + vccio6-supply = <&vcc_io>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + ephy {
> + eth_phy_int_pin: eth-phy-int-pin {
> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + eth_phy_reset_pin: eth-phy-reset-pin {
> + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + leds {
> + led_pin: led-pin {
> + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + usb3 {
> + usb30_host_drv: usb30-host-drv {
> + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + wifi {
> + wifi_en: wifi-en {
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + disable-wp;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>,
> <&sdmmc0_bus4>;
> + vmmc-supply = <&vcc_sd>;
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcc_18>;
> + status = "okay";
> +};
> +
> +&tsadc {
> + status = "okay";
> +};
> +
> +&u2phy {
> + status = "okay";
> +};
> +
> +&u2phy_host {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&usbdrd3 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
> b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
> index a608a219543e..cbeb2e567bf9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
> @@ -1,445 +1,15 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> -/*
> - * (C) Copyright 2020 Chen-Yu Tsai <wens at csie.org>
> - *
> - * Based on ./rk3328-rock64.dts, which is
> - *
> - * Copyright (c) 2017 PINE64
> - */
>
> /dts-v1/;
>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -
> -#include "rk3328.dtsi"
> +#include "rk3328-rock-pi-e-base.dtsi"
>
> / {
> model = "Radxa ROCK Pi E";
> compatible = "radxa,rockpi-e", "rockchip,rk3328";
>
> aliases {
> - ethernet0 = &gmac2io;
> - ethernet1 = &gmac2phy;
> mmc0 = &sdmmc;
> mmc1 = &emmc;
> };
> -
> - chosen {
> - stdout-path = "serial2:1500000n8";
> - };
> -
> - adc-keys {
> - compatible = "adc-keys";
> - io-channels = <&saradc 0>;
> - io-channel-names = "buttons";
> - keyup-threshold-microvolt = <1750000>;
> -
> - /* This button is unpopulated out of the factory. */
> - button-recovery {
> - label = "Recovery";
> - linux,code = <KEY_VENDOR>;
> - press-threshold-microvolt = <10000>;
> - };
> - };
> -
> - gmac_clkin: external-gmac-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "gmac_clkin";
> - #clock-cells = <0>;
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-0 = <&led_pin>;
> - pinctrl-names = "default";
> -
> - led-0 {
> - color = <LED_COLOR_ID_BLUE>;
> - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
> - linux,default-trigger = "heartbeat";
> - };
> - };
> -
> - vcc_sd: sdmmc-regulator {
> - compatible = "regulator-fixed";
> - gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0m1_pin>;
> - regulator-name = "vcc_sd";
> - regulator-boot-on;
> - vin-supply = <&vcc_io>;
> - };
> -
> - vcc_host_5v: vcc-host-5v-regulator {
> - compatible = "regulator-fixed";
> - gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb30_host_drv>;
> - enable-active-high;
> - regulator-name = "vcc_host_5v";
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc_sys>;
> - };
> -
> - vcc_sys: vcc-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> - vcc_wifi: vcc-wifi-regulator {
> - compatible = "regulator-fixed";
> - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&wifi_en>;
> - regulator-name = "vcc_wifi";
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc_io>;
> - };
> -};
> -
> -&analog_sound {
> - status = "okay";
> -};
> -
> -&codec {
> - status = "okay";
> -};
> -
> -&cpu0 {
> - cpu-supply = <&vdd_arm>;
> -};
> -
> -&cpu1 {
> - cpu-supply = <&vdd_arm>;
> -};
> -
> -&cpu2 {
> - cpu-supply = <&vdd_arm>;
> -};
> -
> -&cpu3 {
> - cpu-supply = <&vdd_arm>;
> -};
> -
> -&emmc {
> - bus-width = <8>;
> - cap-mmc-highspeed;
> - mmc-ddr-1_8v;
> - mmc-hs200-1_8v;
> - non-removable;
> - pinctrl-names = "default";
> - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
> - vmmc-supply = <&vcc_io>;
> - vqmmc-supply = <&vcc18_emmc>;
> - status = "okay";
> -};
> -
> -&gmac2io {
> - assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
> - assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
> - clock_in_out = "input";
> - phy-handle = <&rtl8211>;
> - phy-mode = "rgmii";
> - phy-supply = <&vcc_io>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&rgmiim1_pins>;
> - snps,aal;
> - snps,rxpbl = <0x4>;
> - snps,txpbl = <0x4>;
> - tx_delay = <0x26>;
> - rx_delay = <0x11>;
> - status = "okay";
> -
> - mdio {
> - compatible = "snps,dwmac-mdio";
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - rtl8211: ethernet-phy at 1 {
> - reg = <1>;
> - pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>;
> - pinctrl-names = "default";
> - interrupt-parent = <&gpio1>;
> - interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
> - reset-assert-us = <10000>;
> - reset-deassert-us = <50000>;
> - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
> - };
> - };
> -};
> -
> -&gmac2phy {
> - status = "okay";
> -};
> -
> -&gpio0 {
> - gpio-line-names =
> - /* GPIO0_A0 - A7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO0_B0 - B7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO0_C0 - C7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO0_D0 - D7 */
> - "", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
> -};
> -
> -&gpio1 {
> - gpio-line-names =
> - /* GPIO1_A0 - A7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO1_B0 - B7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO1_C0 - C7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO1_D0 - D7 */
> - "", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
> -};
> -
> -&gpio2 {
> - gpio-line-names =
> - /* GPIO2_A0 - A7 */
> - "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
> - "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
> - "pin-33 [GPIO2_A6]", "",
> - /* GPIO2_B0 - B7 */
> - "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
> - /* GPIO2_C0 - C7 */
> - "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
> - "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
> - "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
> - /* GPIO2_D0 - D7 */
> - "", "", "", "", "", "", "", "";
> -};
> -
> -&gpio3 {
> - gpio-line-names =
> - /* GPIO3_A0 - A7 */
> - "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
> - "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
> - /* GPIO3_B0 - B7 */
> - "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
> - /* GPIO3_C0 - C7 */
> - "", "", "", "", "", "", "", "",
> - /* GPIO3_D0 - D7 */
> - "", "", "", "", "", "", "", "";
> -};
> -
> -&i2c1 {
> - status = "okay";
> -
> - rk805: pmic at 18 {
> - compatible = "rockchip,rk805";
> - reg = <0x18>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> - #clock-cells = <1>;
> - clock-output-names = "xin32k", "rk805-clkout2";
> - gpio-controller;
> - #gpio-cells = <2>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&pmic_int_l>;
> - rockchip,system-power-controller;
> - wakeup-source;
> -
> - vcc1-supply = <&vcc_sys>;
> - vcc2-supply = <&vcc_sys>;
> - vcc3-supply = <&vcc_sys>;
> - vcc4-supply = <&vcc_sys>;
> - vcc5-supply = <&vcc_io>;
> - vcc6-supply = <&vcc_sys>;
> -
> - regulators {
> - vdd_log: DCDC_REG1 {
> - regulator-name = "vdd_log";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <712500>;
> - regulator-max-microvolt = <1450000>;
> - regulator-ramp-delay = <12500>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1000000>;
> - };
> - };
> -
> - vdd_arm: DCDC_REG2 {
> - regulator-name = "vdd_arm";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <712500>;
> - regulator-max-microvolt = <1450000>;
> - regulator-ramp-delay = <12500>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <950000>;
> - };
> - };
> -
> - vcc_ddr: DCDC_REG3 {
> - regulator-name = "vcc_ddr";
> - regulator-always-on;
> - regulator-boot-on;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - };
> - };
> -
> - vcc_io: DCDC_REG4 {
> - regulator-name = "vcc_io";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <3300000>;
> - };
> - };
> -
> - vcc_18: LDO_REG1 {
> - regulator-name = "vcc_18";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vcc18_emmc: LDO_REG2 {
> - regulator-name = "vcc18_emmc";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> - vdd_10: LDO_REG3 {
> - regulator-name = "vdd_10";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1000000>;
> - regulator-max-microvolt = <1000000>;
> -
> - regulator-state-mem {
> - regulator-on-in-suspend;
> - regulator-suspend-microvolt = <1000000>;
> - };
> - };
> - };
> - };
> -};
> -
> -&i2s1 {
> - status = "okay";
> -};
> -
> -&io_domains {
> - pmuio-supply = <&vcc_io>;
> - vccio1-supply = <&vcc_io>;
> - vccio2-supply = <&vcc18_emmc>;
> - vccio3-supply = <&vcc_io>;
> - vccio4-supply = <&vcc_io>;
> - vccio5-supply = <&vcc_io>;
> - vccio6-supply = <&vcc_io>;
> - status = "okay";
> -};
> -
> -&pinctrl {
> - ephy {
> - eth_phy_int_pin: eth-phy-int-pin {
> - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> -
> - eth_phy_reset_pin: eth-phy-reset-pin {
> - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
> - };
> - };
> -
> - leds {
> - led_pin: led-pin {
> - rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - pmic {
> - pmic_int_l: pmic-int-l {
> - rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> - };
> - };
> -
> - usb3 {
> - usb30_host_drv: usb30-host-drv {
> - rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -
> - wifi {
> - wifi_en: wifi-en {
> - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> - };
> - };
> -};
> -
> -&sdmmc {
> - bus-width = <4>;
> - cap-sd-highspeed;
> - disable-wp;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>,
> <&sdmmc0_bus4>;
> - vmmc-supply = <&vcc_sd>;
> - status = "okay";
> -};
> -
> -&saradc {
> - vref-supply = <&vcc_18>;
> - status = "okay";
> -};
> -
> -&tsadc {
> - status = "okay";
> -};
> -
> -&u2phy {
> - status = "okay";
> -};
> -
> -&u2phy_host {
> - status = "okay";
> -};
> -
> -&uart2 {
> - status = "okay";
> -};
> -
> -&usbdrd3 {
> - dr_mode = "host";
> - status = "okay";
> -};
> -
> -&usb_host0_ehci {
> - status = "okay";
> };
More information about the Linux-rockchip
mailing list