[PATCH v2 3/5] arm64: dts: rockchip: Add HDMI & VOP2 to Khadas Edge 2

[Jacobe Zang]

Add the HDMI, VP, VOP nodes which HDMI function needs.

Signed-off-by: Jacobe Zang <jacobe.zang at wesion.com>
---
 .../dts/rockchip/rk3588s-khadas-edge2.dts     | 36 +++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index a82f10312eacd..233bab17bffd2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/usb/pd.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -827,6 +828,7 @@ usbdp_phy0_dp_altmode_mux: endpoint at 1 {
 };
 
 &usb_host0_xhci {
+	dr-mode = "otg";
 	usb-role-switch;
 	status = "okay";
 
@@ -851,3 +853,37 @@ &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
+&display_subsystem {
+	clocks = <&hdptxphy_hdmi0>;
+	clock-names = "hdmi0_phy_pll";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
-- 
2.34.1