[PATCH v4 06/13] dt-bindings: rockchip: Add DesignWare based PCIe Endpoint controller
Manivannan Sadhasivam
mani at kernel.org
Wed Jun 5 00:42:40 PDT 2024
On Wed, May 29, 2024 at 10:29:00AM +0200, Niklas Cassel wrote:
> Document DT bindings for PCIe Endpoint controller found in Rockchip SoCs.
>
> Signed-off-by: Niklas Cassel <cassel at kernel.org>
Couple of nitpicks below. With those fixed,
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Reviewed-by: Rob Herring (Arm) <robh at kernel.org>
> ---
> .../bindings/pci/rockchip-dw-pcie-common.yaml | 14 ++++
> .../bindings/pci/rockchip-dw-pcie-ep.yaml | 95 ++++++++++++++++++++++
> 2 files changed, 109 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
> index ec5e6a3d048e..cc9adfc7611c 100644
> --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
> @@ -39,6 +39,7 @@ properties:
> - const: ref
>
> interrupts:
> + minItems: 5
> items:
> - description:
> Combined system interrupt, which is used to signal the following
> @@ -63,14 +64,27 @@ properties:
> interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
> tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
> nf_err_rx, f_err_rx, radm_qoverflow
> + - description:
> + eDMA write channel 0 interrupt
> + - description:
> + eDMA write channel 1 interrupt
> + - description:
> + eDMA read channel 0 interrupt
> + - description:
> + eDMA read channel 1 interrupt
>
> interrupt-names:
> + minItems: 5
> items:
> - const: sys
> - const: pmc
> - const: msg
> - const: legacy
> - const: err
> + - const: dma0
> + - const: dma1
> + - const: dma2
> + - const: dma3
>
> num-lanes: true
>
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml
> new file mode 100644
> index 000000000000..e0c8668afc01
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-ep.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe Endpoint controller on Rockchip SoCs
> +
> +maintainers:
> + - Niklas Cassel <cassel at kernel.org>
> +
> +description: |+
> + RK3588 SoC PCIe Endpoint controller is based on the Synopsys DesignWare
> + PCIe IP and thus inherits all the common properties defined in
> + snps,dw-pcie-ep.yaml.
> +
> +allOf:
> + - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> + - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,rk3568-pcie-ep
> + - rockchip,rk3588-pcie-ep
> +
> + reg:
> + items:
> + - description: Data Bus Interface (DBI) registers
> + - description: Data Bus Interface (DBI) shadow registers
> + - description: Rockchip designed configuration registers
> + - description: Memory region used to map remote RC address space
> + - description: Address Translation Unit (ATU) registers
Nit: Internal Address Translation Unit (iATU)
> +
> + reg-names:
> + items:
> + - const: dbi
> + - const: dbi2
> + - const: apb
> + - const: addr_space
> + - const: atu
> +
> +required:
> + - interrupts
> + - interrupt-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rockchip,rk3588-cru.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/power/rk3588-power.h>
> + #include <dt-bindings/reset/rockchip,rk3588-cru.h>
> +
> + bus {
Even though 'bus' node is also used in many bindings, I prefer 'soc' since it
fits better IMO.
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + pcie3x4_ep: pcie-ep at fe150000 {
> + compatible = "rockchip,rk3588-pcie-ep";
> + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
> + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
> + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
> + clock-names = "aclk_mst", "aclk_slv",
> + "aclk_dbi", "pclk",
> + "aux", "pipe";
> + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "sys", "pmc", "msg", "legacy", "err",
> + "dma0", "dma1", "dma2", "dma3";
> + max-link-speed = <3>;
> + num-lanes = <4>;
> + phys = <&pcie30phy>;
> + phy-names = "pcie-phy";
> + power-domains = <&power RK3588_PD_PCIE>;
> + reg = <0xa 0x40000000 0x0 0x00100000>,
> + <0xa 0x40100000 0x0 0x00100000>,
> + <0x0 0xfe150000 0x0 0x00010000>,
> + <0x9 0x00000000 0x0 0x40000000>,
> + <0xa 0x40300000 0x0 0x00100000>;
> + reg-names = "dbi", "dbi2", "apb", "addr_space", "atu";
Can you move 'reg' and 'reg-names' below 'compatible' to align with common
convention?
- Mani
> + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
> + reset-names = "pwr", "pipe";
> + };
> + };
> +...
>
> --
> 2.45.1
>
--
மணிவண்ணன் சதாசிவம்
More information about the Linux-rockchip
mailing list