[PATCH v2 03/14] arm64: dts: rockchip: enable uart0 on Qnap-TS433

[Heiko Stuebner]

Uart0 is connected to an MCU on the board that handles system control
like the fan-speed. So far no driver for it is available though.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
index 0636a08986572..f3ce3cc4598db 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts
@@ -102,6 +102,10 @@ &sdhci {
 	status = "okay";
 };
 
+&uart0 {
+	status = "okay";
+};
+
 /*
  * Pins available on CN3 connector at TTL voltage level (3V3).
  * ,_  _.
-- 
2.39.2