[PATCH v3 4/4] arm64: dts: rockchip: Add devicetree for Pine64 PineTab2

[Dang Huynh]

On Tuesday, January 2, 2024 6:07:56 PM UTC Ondřej Jirman wrote:
> On Tue, Jan 02, 2024 at 05:15:47PM +0100, Manuel Traut wrote:
> > +&pcie2x1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pcie_reset_h>;
> > +	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> > +	vpcie3v3-supply = <&vcc3v3_minipcie>;
> > +	status = "okay";
> > +};
> 
> Does it make sense to enable this HW block by default, when it isn't used on
> actual HW?
> 

PCI-E is hooked up to a connector in the schematics, so I think it make sense 
to enable it when there's one available.