[PATCH v5 08/44] drm/connector: hdmi: Add Broadcast RGB property

[Maxime Ripard]

On Mon, Feb 12, 2024 at 05:39:03PM +0100, Hans Verkuil wrote:
> On 12/02/2024 16:49, Ville Syrjälä wrote:
> > On Mon, Feb 12, 2024 at 11:01:07AM +0100, Maxime Ripard wrote:
> >> On Fri, Feb 09, 2024 at 09:34:35PM +0100, Sebastian Wick wrote:
> >>> On Mon, Feb 05, 2024 at 10:39:38AM +0100, Maxime Ripard wrote:
> >>>> On Fri, Feb 02, 2024 at 06:37:52PM +0200, Ville Syrjälä wrote:
> >>>>> On Fri, Feb 02, 2024 at 04:59:30PM +0100, Maxime Ripard wrote:
> >>>>>> On Fri, Feb 02, 2024 at 05:40:47PM +0200, Ville Syrjälä wrote:
> >>>>>>> On Fri, Feb 02, 2024 at 02:01:39PM +0100, Maxime Ripard wrote:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> On Mon, Jan 15, 2024 at 03:37:20PM +0100, Sebastian Wick wrote:
> >>>>>>>>>>>  /**
> >>>>>>>>>>>   * DOC: HDMI connector properties
> >>>>>>>>>>>   *
> >>>>>>>>>>> + * Broadcast RGB
> >>>>>>>>>>> + *      Indicates the RGB Quantization Range (Full vs Limited) used.
> >>>>>>>>>>> + *      Infoframes will be generated according to that value.
> >>>>>>>>>>> + *
> >>>>>>>>>>> + *      The value of this property can be one of the following:
> >>>>>>>>>>> + *
> >>>>>>>>>>> + *      Automatic:
> >>>>>>>>>>> + *              RGB Range is selected automatically based on the mode
> >>>>>>>>>>> + *              according to the HDMI specifications.
> >>>>>>>>>>> + *
> >>>>>>>>>>> + *      Full:
> >>>>>>>>>>> + *              Full RGB Range is forced.
> >>>>>>>>>>> + *
> >>>>>>>>>>> + *      Limited 16:235:
> >>>>>>>>>>> + *              Limited RGB Range is forced. Unlike the name suggests,
> >>>>>>>>>>> + *              this works for any number of bits-per-component.
> >>>>>>>>>>> + *
> >>>>>>>>>>> + *      Drivers can set up this property by calling
> >>>>>>>>>>> + *      drm_connector_attach_broadcast_rgb_property().
> >>>>>>>>>>> + *
> >>>>>>>>>>
> >>>>>>>>>> This is a good time to document this in more detail. There might be two
> >>>>>>>>>> different things being affected:
> >>>>>>>>>>
> >>>>>>>>>> 1. The signalling (InfoFrame/SDP/...)
> >>>>>>>>>> 2. The color pipeline processing
> >>>>>>>>>>
> >>>>>>>>>> All values of Broadcast RGB always affect the color pipeline processing
> >>>>>>>>>> such that a full-range input to the CRTC is converted to either full- or
> >>>>>>>>>> limited-range, depending on what the monitor is supposed to accept.
> >>>>>>>>>>
> >>>>>>>>>> When automatic is selected, does that mean that there is no signalling,
> >>>>>>>>>> or that the signalling matches what the monitor is supposed to accept
> >>>>>>>>>> according to the spec? Also, is this really HDMI specific?
> >>>>>>>>>>
> >>>>>>>>>> When full or limited is selected and the monitor doesn't support the
> >>>>>>>>>> signalling, what happens?
> >>>>>>>>>
> >>>>>>>>> Forgot to mention: user-space still has no control over RGB vs YCbCr on
> >>>>>>>>> the cable, so is this only affecting RGB? If not, how does it affect
> >>>>>>>>> YCbCr?
> >>>>>>>>
> >>>>>>>> So I dug a bit into both the i915 and vc4 drivers, and it looks like if
> >>>>>>>> we're using a YCbCr format, i915 will always use a limited range while
> >>>>>>>> vc4 will follow the value of the property.
> >>>>>>>
> >>>>>>> The property is literally called "Broadcast *RGB*".
> >>>>>>> That should explain why it's only affecting RGB.
> >>>>>>
> >>>>>> Right. And the limited range option is called "Limited 16:235" despite
> >>>>>> being usable on bpc > 8 bits. Naming errors occurs, and history happens
> >>>>>> to make names inconsistent too, that's fine and not an argument in
> >>>>>> itself.
> >>>>>>
> >>>>>>> Full range YCbCr is a much rarer beast so we've never bothered
> >>>>>>> to enable it.
> >>>>>>
> >>>>>> vc4 supports it.
> >>>>>
> >>>>> Someone implemented it incorrectly then.
> >>>>
> >>>> Incorrectly according to what documentation / specification? I'm sorry,
> >>>> but I find it super ironic that i915 gets to do its own thing, not
> >>>> document any of it, and when people try to clean things up they get told
> >>>> that we got it all wrong.
> >>>
> >>> FWIW, this was an i915 property and if another driver uses the same
> >>> property name it must have the same behavior. Yes, it isn't standardized
> >>> and yes, it's not documented (hence this effort here) but it's still on
> >>> vc4 to make the property compatible.
> >>
> >> How is it not compatible? It's a superset of what i915 provides, but
> >> it's strictly compatible with it.
> > 
> > No it is not. Eg. what happens if you set the thing to full range for
> > RGB (which you must on many broken monitors), and then the kernel
> > automagically switches to YCbCr (for whatever reason) but the monitor
> > doesn't support full range YCbCr? Answer: you get crap output.
> 
> The Broadcast RGB setting is really specific to RGB output. That's where
> you need it, since due to messed up standards in the past it is common to
> have to override this.
> 
> For YCbCr it is not needed since it is always limited range in practice.
> If there is ever a need to support full range YCbCr, then a new "Broadcast YCbCr"
> setting should be created.

We can't implement that, really. The userspace has no way to tell if RGB
or YUV is going to be used, so it wouldn't have an idea of what property
it needs to set.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240212/09ec96c0/attachment.sig>