[PATCH 3/3] arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6

[Heiko Stuebner]

vcc3v3-sd-s0-regulator used enable-active-low. According the binding
of the fixed regulator, that is the assumed mode of operation if
enable-active-high is not specified. So this is property is not part
of the binding, therefore remove it.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 94a1c83a322d..d035a44e5b20 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -186,7 +186,6 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator {
 
 	vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
 		compatible = "regulator-fixed";
-		enable-active-low;
 		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
 		regulator-boot-on;
 		regulator-max-microvolt = <3300000>;
-- 
2.43.0