[PATCH v6 5/9] arm64: dts: rockchip: add SPI flash on NanoPC-T6

[Marcin Juszkiewicz]

FriendlyELEC NanoPC-T6 has optional SPI flash chip on-board.
It is populated with 32MB one on LTS version.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz at linaro.org>
Reviewed-by: Jonas Karlman <jonas at kwiboo.se>
---
 arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index d199f51a220c..77580c671b36 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -560,6 +560,21 @@ &sdmmc {
 	status = "okay";
 };
 
+/* optional on non-LTS, populated on LTS version */
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim1_pins>;
+	status = "okay";
+
+	flash at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;

-- 
2.46.0