[PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
Shreeya Patel
shreeya.patel at collabora.com
Thu Aug 29 03:03:40 PDT 2024
---- On Thu, 29 Aug 2024 03:43:40 +0530 Tim Surber wrote ---
> Hi Shreeya,
>
> another hint:
>
> Changing the EDID like you described fixed the 4k60fps BGR3 input.
>
> But still for NV16/NV24 (I can't output NV12 for some reason) there is
> the error which Nicolas described.
>
> The output from v4l2-ctl for NV16/NV24 is:
>
> Plane 0 :
> Bytes per Line : 3840
> Size Image : 8294400
>
> According to Nicolas there should be an additional plane/more memory
> reserved.
>
Yes, it could be possible that the imagesize is incorrect as we made some
modifications related to it in v4. I'll increase this as required by the NV12/24
and see if that fixes the issue.
Thanks,
Shreeya Patel
> This leads to errors when trying to read the device using for example
> gstreamer:
>
> gst_memory_resize: assertion 'size + mem->offset + offset <=
> mem->maxsize' failed
>
>
> This seems to always happen using the NV16/NV24 formats regardless of
> resolution/fps.
>
>
> Best regards,
>
> Tim
>
> On 14.08.24 12:22, Shreeya Patel wrote:
> > ---- On Sun, 04 Aug 2024 05:27:08 +0530 Tim Surber wrote ---
> > > Hi Shreeya,
> > >
> >
> > Hi Tim,
> >
> >
> > > I tested your patch and noticed problems when using 3840x2160 resolution
> > > at 60fps.
> > >
> > > For my testing I connected an HDMI source and set it to 4k60fps. I
> > > verified that this source and the cables work on a screen at this
> > > resolution.
> > >
> > > Using
> > > 'v4l2-ctl --verbose -d /dev/video1
> > > --set-fmt-video=width=3840,height=2160,pixelformat='NV12'
> > > --stream-mmap=4 --stream-skip=3 --stream-count=100 --stream-poll'
> > > I get the video format output, but not the periodic output which shows
> > > the fps.
> > >
> > > Using
> > > 'GST_DEBUG=4 gst-launch-1.0 -v v4l2src device=/dev/video1 !
> > > fpsdisplaysink text-overlay=false video-sink="fakevideosink"'
> > > I get the following error message:
> > >
> > > (gst-launch-1.0:3231): GStreamer-CRITICAL **: 01:34:39.137:
> > > gst_memory_resize: assertion 'size + mem->offset + offset <=
> > > mem->maxsize' failed
> > > 0:00:03.489382529 3231 0xffffa0000b90 WARN v4l2bufferpool
> > > gstv4l2bufferpool.c:2209:gst_v4l2_buffer_pool_process:
> > > Dropping truncated buffer, this is likely a driver bug.
> > > 0:00:03.489421906 3231 0xffffa0000b90 WARN bufferpool
> > > gstbufferpool.c:1252:default_reset_buffer: Buffer
> > > 0xffff98008e80 without the memory tag has maxsize (8294400) that is
> > > smaller than the configured buffer pool size (12441600). The buffer will
> > > be not be reused. This is most likely a bug in this GstBufferPool subclass
> > >
> > >
> > > Everything works with 4k30fps or 1080p 60fps. The hardware should
> > > support 4k60fps.
> > >
> >
> >
> > Sorry for the delayed response, I've been trying to reproduce this on my side
> > and to also fix it.
> >
> > It seems you are right, 4K at 60 fps doesn't work with the latest version of HDMIRX.
> > We found out that it could be because of the current EDID which shows some failures.
> >
> > Though I wasn't able to test the following on my side since my device doesn't support
> > 4K, one of my colleague tried to replace the EDID and 4K at 60 fps worked fine after that.
> >
> > If you'd like to try it yourself then following is the command to get the new EDID
> >
> > v4l2-ctl --show-edid type=hdmi-4k-600mhz
> >
> > You will have to replace the EDID in the driver with the EDID you get the from the above
> > command in HEX format.
> >
> > Thanks for reporting this, I will soon send v5 with this change included in it.
> >
> >
> > Thanks,
> > Shreeya Patel
> >
> >
> > > Best regards,
> > > Tim
> > >
> > > On 19.07.24 14:40, Shreeya Patel wrote:
> > > > This series implements support for the Synopsys DesignWare
> > > > HDMI RX Controller, being compliant with standard HDMI 1.4b
> > > > and HDMI 2.0.
> > > >
> > > > Features that are currently supported by the HDMI RX driver
> > > > have been tested on rock5b board using a HDMI to micro-HDMI cable.
> > > > It is recommended to use a good quality cable as there were
> > > > multiple issues seen during testing the driver.
> > > >
> > > > Please note the below information :-
> > > > * While testing the driver on rock5b we noticed that the binary BL31
> > > > from Rockchip contains some unknown code to get the HDMI-RX PHY
> > > > access working without any errors.
> > > > With TF-A BL31, the HDMI-RX PHY also works fine but there were no
> > > > interrupts seen for rk_hdmirx-hdmi leading to some errors when
> > > > loading the driver [0]. It doesn't affect the functionality of the
> > > > driver though.
> > > > * We have tested the working of OBS studio with HDMIRX driver and
> > > > there were no issues seen.
> > > > * We also tested and verified the support for interlaced video.
> > > >
> > > > [0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1
> > > >
> > > > To test the HDMI RX Controller driver, following example commands can be used :-
> > > >
> > > > root at debian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
> > > > --set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
> > > > --stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll
> > > >
> > > > root at debian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
> > > > -s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv
> > > >
> > > > CEC compliance test results :-
> > > >
> > > > * https://gitlab.collabora.com/-/snippets/381
> > > > * https://gitlab.collabora.com/-/snippets/380
> > > >
> > > > Following is the v4l2-compliance test result :-
> > > >
> > > > root at debian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
> > > > v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
> > > > v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32
> > > >
> > > > Compliance test for snps_hdmirx device /dev/video0:
> > > >
> > > > Driver Info:
> > > > Driver name : snps_hdmirx
> > > > Card type : snps_hdmirx
> > > > Bus info : platform:fdee0000.hdmi-receiver
> > > > Driver version : 6.10.0
> > > > Capabilities : 0x84201000
> > > > Video Capture Multiplanar
> > > > Streaming
> > > > Extended Pix Format
> > > > Device Capabilities
> > > > Device Caps : 0x04201000
> > > > Video Capture Multiplanar
> > > > Streaming
> > > > Extended Pix Format
> > > >
> > > > Required ioctls:
> > > > test VIDIOC_QUERYCAP: OK
> > > > test invalid ioctls: OK
> > > >
> > > > Allow for multiple opens:
> > > > test second /dev/video0 open: OK
> > > > test VIDIOC_QUERYCAP: OK
> > > > test VIDIOC_G/S_PRIORITY: OK
> > > > test for unlimited opens: OK
> > > >
> > > > Debug ioctls:
> > > > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > > > test VIDIOC_LOG_STATUS: OK
> > > >
> > > > Input ioctls:
> > > > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > > > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > > > test VIDIOC_G/S/ENUMINPUT: OK
> > > > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > > > Inputs: 1 Audio Inputs: 0 Tuners: 0
> > > >
> > > > Output ioctls:
> > > > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > > > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > > > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > > > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > > > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > > > Outputs: 0 Audio Outputs: 0 Modulators: 0
> > > >
> > > > Input/Output configuration ioctls:
> > > > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > > > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> > > > test VIDIOC_DV_TIMINGS_CAP: OK
> > > > test VIDIOC_G/S_EDID: OK
> > > >
> > > > Control ioctls (Input 0):
> > > > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > > > test VIDIOC_QUERYCTRL: OK
> > > > test VIDIOC_G/S_CTRL: OK
> > > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > > > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > > > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > > > Standard Controls: 3 Private Controls: 0
> > > >
> > > > Format ioctls (Input 0):
> > > > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > > > test VIDIOC_G/S_PARM: OK
> > > > test VIDIOC_G_FBUF: OK (Not Supported)
> > > > test VIDIOC_G_FMT: OK
> > > > test VIDIOC_TRY_FMT: OK
> > > > test VIDIOC_S_FMT: OK
> > > > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > > > test Cropping: OK (Not Supported)
> > > > test Composing: OK (Not Supported)
> > > > test Scaling: OK (Not Supported)
> > > >
> > > > Codec ioctls (Input 0):
> > > > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > > > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > > > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > > >
> > > > Buffer ioctls (Input 0):
> > > > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > > > test CREATE_BUFS maximum buffers: OK
> > > > test VIDIOC_REMOVE_BUFS: OK
> > > > test VIDIOC_EXPBUF: OK
> > > > test Requests: OK (Not Supported)
> > > >
> > > > Total for snps_hdmirx device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
> > > >
> > > > Changes in v4 :-
> > > > - Remove DTS changes included in the device tree patch
> > > > - Remove the hdmi rx pin info as it's already present
> > > > in the rk3588-base-pinctrl.dtsi
> > > > - Create a separate config option for selecting the EDID
> > > > and enable it by default
> > > > - Improve the comment related to DV timings and move it
> > > > to the side of hdmirx_get_detected_timings
> > > > - Add 100ms delay before pulling the HPD high
> > > > - Do not return the detected timings from VIDIOC_G_DV_TIMINGS
> > > > - Drop the bus info from hdmirx_querycap
> > > > - If *num_planes != 0 then return 0 in hdmirx_queue_setup
> > > > - Set queue->min_queued_buffers to 1
> > > > - Drop q->allow_cache_hints = 0; as it's always 0 by default
> > > > - Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
> > > > - Drop .read = vb2_fop_read as it's not supported by driver
> > > > - Remove redundant edid_init_data_600M
> > > > - Make HPD low when driver is loaded
> > > > - Add support for reading AVI Infoframe
> > > > - Remove msg_len checks from hdmirx_cec_transmit
> > > > - Add info about the CEC compliance test in the cover letter
> > > > - Add arbitration lost status
> > > > - Validate the physical address inside the EDID
> > > >
> > > > Changes in v3 :-
> > > > - Use v4l2-common helpers in the HDMIRX driver
> > > > - Rename cma node and phandle names
> > > > - Elaborate the comment to explain 160MiB calculation
> > > > - Move &hdmi_receiver_cma to the rock5b dts file
> > > > - Add information about interlaced video testing in the
> > > > cover-letter
> > > >
> > > > Changes in v2 :-
> > > > - Fix checkpatch --strict warnings
> > > > - Move the dt-binding include file changes in a separate patch
> > > > - Add a description for the hardware in the dt-bindings file
> > > > - Rename resets, vo1 grf and HPD properties
> > > > - Add a proper description for grf and vo1-grf phandles in the
> > > > bindings
> > > > - Rename the HDMI RX node name to hdmi-receiver
> > > > - Include gpio header file in binding example to fix the
> > > > dt_binding_check failure
> > > > - Move hdmirx_cma node to the rk3588.dtsi file
> > > > - Add an entry to MAINTAINERS file for the HDMIRX driver
> > > >
> > > > Shreeya Patel (4):
> > > > MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
> > > > dt-bindings: media: Document bindings for HDMI RX Controller
> > > > arm64: dts: rockchip: Add device tree support for HDMI RX Controller
> > > > media: platform: synopsys: Add support for hdmi input driver
> > > >
> > > > .../bindings/media/snps,dw-hdmi-rx.yaml | 132 +
> > > > MAINTAINERS | 8 +
> > > > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 14 +
> > > > .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 56 +
> > > > drivers/media/platform/Kconfig | 1 +
> > > > drivers/media/platform/Makefile | 1 +
> > > > drivers/media/platform/synopsys/Kconfig | 3 +
> > > > drivers/media/platform/synopsys/Makefile | 2 +
> > > > .../media/platform/synopsys/hdmirx/Kconfig | 27 +
> > > > .../media/platform/synopsys/hdmirx/Makefile | 4 +
> > > > .../platform/synopsys/hdmirx/snps_hdmirx.c | 2763 +++++++++++++++++
> > > > .../platform/synopsys/hdmirx/snps_hdmirx.h | 394 +++
> > > > .../synopsys/hdmirx/snps_hdmirx_cec.c | 285 ++
> > > > .../synopsys/hdmirx/snps_hdmirx_cec.h | 44 +
> > > > 14 files changed, 3734 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> > > > create mode 100644 drivers/media/platform/synopsys/Kconfig
> > > > create mode 100644 drivers/media/platform/synopsys/Makefile
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
> > > > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
> > > >
> > >
>
More information about the Linux-rockchip
mailing list