[PATCH v3 2/7] arm64: dts: rockchip: add NanoPC-T6 LTS

[Marcin Juszkiewicz]

FriendlyELEC introduced a second version of NanoPC-T6 SBC.

The miniPCIe slot got removed and USB 2.0 configuration has changed.
There are two external accessible ports and two ports on the internal
header.

There is an on-board USB hub which provides:
- one external connector (bottom one)
- two internal ports on pin header
- one port for m.2 E connector

The top USB 2.0 connector comes directly from the SoC.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz at linaro.org>
---
 arch/arm64/boot/dts/rockchip/Makefile              |  1 +
 .../boot/dts/rockchip/rk3588-nanopc-t6-lts.dts     | 61 ++++++++++++++++++++++
 2 files changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index fda1b980eb4b..0f982c741243 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -128,6 +128,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
new file mode 100644
index 000000000000..e950e40632cf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6-lts.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ * Copyright (c) 2024 Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "rk3588-nanopc-t6.dts"
+
+/ {
+	model = "FriendlyElec NanoPC-T6 LTS";
+	compatible = "friendlyarm,nanopc-t6-lts", "rockchip,rk3588";
+
+	/* provide power for on-board USB 2.0 hub */
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb20_host_pwren>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb20_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&pinctrl {
+	usb {
+		usb20_host_pwren: usb20-host-pwren {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};

-- 
2.46.0