[PATCH v4 3/4] dt-bindings: display: rockchip: Add schema for RK3588 HDMI TX Controller

[Conor Dooley]

On Tue, Aug 20, 2024 at 03:37:44PM +0300, Cristian Ciocaltea wrote:
> On 8/19/24 7:53 PM, Conor Dooley wrote:
> > On Mon, Aug 19, 2024 at 01:29:30AM +0300, Cristian Ciocaltea wrote:
> >> Rockchip RK3588 SoC integrates the Synopsys DesignWare HDMI 2.1
> >> Quad-Pixel (QP) TX controller IP.
> >>
> >> Since this is a new IP block, quite different from those used in the
> >> previous generations of Rockchip SoCs, add a dedicated binding file.
> >>
> >> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> >> ---
> >>  .../display/rockchip/rockchip,dw-hdmi-qp.yaml      | 170 +++++++++++++++++++++
> >>  1 file changed, 170 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi-qp.yaml
> >> new file mode 100644
> >> index 000000000000..de470923d823
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi-qp.yaml
> > 
> > Filename matching the compatible please.
> 
> RK3588 happens to be the first Rockchip SoC using the QP TX controller, but
> more are expected to come, e.g. RK3576.  Should we add 'rk3588-' to the
> filename and let it being dropped when the 2nd SoC is added?

Yes to the former, no to the latter.

> 
> >> @@ -0,0 +1,170 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi-qp.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Rockchip DW HDMI QP TX Encoder
> >> +
> >> +maintainers:
> >> +  - Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> >> +
> >> +description:
> >> +  Rockchip RK3588 SoC integrates the Synopsys DesignWare HDMI QP TX controller
> >> +  IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block.
> >> +
> >> +allOf:
> >> +  - $ref: /schemas/display/bridge/synopsys,dw-hdmi-qp.yaml#
> >> +  - $ref: /schemas/sound/dai-common.yaml#
> >> +
> >> +properties:
> >> +  compatible:
> >> +    enum:
> >> +      - rockchip,rk3588-dw-hdmi-qp
> >> +
> >> +  clocks:
> >> +    minItems: 4
> >> +    items:
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - {}
> > 
> > Why have you chosen to do things like this?  I find it makes things less
> > clear than reiterating the names of the required clocks.
> 
> I've just followed the approach used in rockchip,dw-hdmi.yaml.  Personally,
> I preferred this for making a clear distinction between common and custom
> items, in addition to reducing content dupplication. 
> 
> If readability is more important/desired, I will expand the items.  For
> consistency, I assume clock-names, interrupts and interrupt-names below
> should be treated similarly.

I don't feel particularly strongly here FWIW. If you chose to do it, do
it for all properties, yes.

> >> +      # The next clocks are optional, but shall be specified in this
> >> +      # order when present.
> >> +      - description: TMDS/FRL link clock
> >> +      - description: Video datapath clock
> > 
> > I don't get what you mean by optional. You have one SoC, either they are
> > or are not connected, unless there's multiple instances of this IP block
> > on the SoC and some do and some do not have these clocks?
> > Ditto for the interrupts.
> 
> They were handled as such in vendor tree, probably assuming other SoC
> variants might not need them.  I agree it doesn't make sense to have them
> optional at this point.  Will fix this in the next revision.
> 
> >> +
> >> +  clock-names:
> >> +    minItems: 4
> >> +    items:
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - enum: [hdp, hclk_vo1]
> >> +      - const: hclk_vo1
> >> +
> >> +  interrupts:
> >> +    items:
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - description: HPD interrupt
> >> +
> >> +  interrupt-names:
> >> +    items:
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - {}
> >> +      - const: hpd
> >> +
> >> +  phys:
> >> +    maxItems: 1
> >> +    description: The HDMI/eDP PHY.
> >> +
> >> +  phy-names:
> >> +    const: hdmi
> >> +
> >> +  power-domains:
> >> +    maxItems: 1
> >> +
> >> +  resets:
> >> +    minItems: 2
> >> +    maxItems: 2
> >> +
> >> +  reset-names:
> >> +    items:
> >> +      - const: ref
> >> +      - const: hdp
> >> +
> >> +  "#sound-dai-cells":
> >> +    const: 0
> >> +
> >> +  rockchip,grf:
> >> +    $ref: /schemas/types.yaml#/definitions/phandle
> >> +    description:
> >> +      Most HDMI QP related data is accessed through SYS GRF regs.
> >> +
> >> +  rockchip,vo1-grf:
> >> +    $ref: /schemas/types.yaml#/definitions/phandle
> >> +    description:
> >> +      Additional HDMI QP related data is accessed through VO1 GRF regs.
> > 
> > Why are these required? What prevents you looking up the syscons by
> > compatible?
> 
> That is for getting the proper instance:

Ah, that makes sense. I am, however, curious why these have the same
compatible when they have different sized regions allocated to them.

> 	vo0_grf: syscon at fd5a6000 {
> 		compatible = "rockchip,rk3588-vo-grf", "syscon";
> 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
> 		clocks = <&cru PCLK_VO0GRF>;
> 	};
> 
> 	vo1_grf: syscon at fd5a8000 {
> 		compatible = "rockchip,rk3588-vo-grf", "syscon";
> 		reg = <0x0 0xfd5a8000 0x0 0x100>;
> 		clocks = <&cru PCLK_VO1GRF>;
> 	};
> 
> Thanks for reviewing,
> Cristian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240820/0c5eb346/attachment-0001.sig>