[PATCH v4 0/4] Add Synopsys DesignWare HDMI RX Controller
Nicolas Dufresne
nicolas.dufresne at collabora.com
Mon Aug 5 10:02:35 PDT 2024
Hi Tim,
Le dimanche 04 août 2024 à 01:57 +0200, Tim Surber a écrit :
> Hi Shreeya,
>
> I tested your patch and noticed problems when using 3840x2160 resolution
> at 60fps.
>
> For my testing I connected an HDMI source and set it to 4k60fps. I
> verified that this source and the cables work on a screen at this
> resolution.
>
> Using
> 'v4l2-ctl --verbose -d /dev/video1
> --set-fmt-video=width=3840,height=2160,pixelformat='NV12'
> --stream-mmap=4 --stream-skip=3 --stream-count=100 --stream-poll'
> I get the video format output, but not the periodic output which shows
> the fps.
>
> Using
> 'GST_DEBUG=4 gst-launch-1.0 -v v4l2src device=/dev/video1 !
> fpsdisplaysink text-overlay=false video-sink="fakevideosink"'
> I get the following error message:
>
> (gst-launch-1.0:3231): GStreamer-CRITICAL **: 01:34:39.137:
> gst_memory_resize: assertion 'size + mem->offset + offset <=
> mem->maxsize' failed
> 0:00:03.489382529 3231 0xffffa0000b90 WARN v4l2bufferpool
> gstv4l2bufferpool.c:2209:gst_v4l2_buffer_pool_process:<v4l2src0:pool0:src>
> Dropping truncated buffer, this is likely a driver bug.
> 0:00:03.489421906 3231 0xffffa0000b90 WARN bufferpool
> gstbufferpool.c:1252:default_reset_buffer:<v4l2src0:pool0:src> Buffer
> 0xffff98008e80 without the memory tag has maxsize (8294400) that is
> smaller than the configured buffer pool size (12441600). The buffer will
> be not be reused. This is most likely a bug in this GstBufferPool subclass
We'll need to check if its a userspace issue rather then kernel one. You can
test with v4l2-ctl (change 0 to the index of your video node):
v4l2-ctl -d 0 --stream-mmap --set-fmt-video=width=3840,height=2160 --set-parm 60
The option --stream-to let you write to a file (will be slower then real-time
though).
Nicolas
>
>
> Everything works with 4k30fps or 1080p 60fps. The hardware should
> support 4k60fps.
>
> Best regards,
> Tim
>
> On 19.07.24 14:40, Shreeya Patel wrote:
> > This series implements support for the Synopsys DesignWare
> > HDMI RX Controller, being compliant with standard HDMI 1.4b
> > and HDMI 2.0.
> >
> > Features that are currently supported by the HDMI RX driver
> > have been tested on rock5b board using a HDMI to micro-HDMI cable.
> > It is recommended to use a good quality cable as there were
> > multiple issues seen during testing the driver.
> >
> > Please note the below information :-
> > * While testing the driver on rock5b we noticed that the binary BL31
> > from Rockchip contains some unknown code to get the HDMI-RX PHY
> > access working without any errors.
> > With TF-A BL31, the HDMI-RX PHY also works fine but there were no
> > interrupts seen for rk_hdmirx-hdmi leading to some errors when
> > loading the driver [0]. It doesn't affect the functionality of the
> > driver though.
> > * We have tested the working of OBS studio with HDMIRX driver and
> > there were no issues seen.
> > * We also tested and verified the support for interlaced video.
> >
> > [0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1
> >
> > To test the HDMI RX Controller driver, following example commands can be used :-
> >
> > root at debian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
> > --set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
> > --stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll
> >
> > root at debian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
> > -s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv
> >
> > CEC compliance test results :-
> >
> > * https://gitlab.collabora.com/-/snippets/381
> > * https://gitlab.collabora.com/-/snippets/380
> >
> > Following is the v4l2-compliance test result :-
> >
> > root at debian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
> > v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
> > v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32
> >
> > Compliance test for snps_hdmirx device /dev/video0:
> >
> > Driver Info:
> > Driver name : snps_hdmirx
> > Card type : snps_hdmirx
> > Bus info : platform:fdee0000.hdmi-receiver
> > Driver version : 6.10.0
> > Capabilities : 0x84201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04201000
> > Video Capture Multiplanar
> > Streaming
> > Extended Pix Format
> >
> > Required ioctls:
> > test VIDIOC_QUERYCAP: OK
> > test invalid ioctls: OK
> >
> > Allow for multiple opens:
> > test second /dev/video0 open: OK
> > test VIDIOC_QUERYCAP: OK
> > test VIDIOC_G/S_PRIORITY: OK
> > test for unlimited opens: OK
> >
> > Debug ioctls:
> > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> > test VIDIOC_LOG_STATUS: OK
> >
> > Input ioctls:
> > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> > test VIDIOC_ENUMAUDIO: OK (Not Supported)
> > test VIDIOC_G/S/ENUMINPUT: OK
> > test VIDIOC_G/S_AUDIO: OK (Not Supported)
> > Inputs: 1 Audio Inputs: 0 Tuners: 0
> >
> > Output ioctls:
> > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> > Outputs: 0 Audio Outputs: 0 Modulators: 0
> >
> > Input/Output configuration ioctls:
> > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> > test VIDIOC_DV_TIMINGS_CAP: OK
> > test VIDIOC_G/S_EDID: OK
> >
> > Control ioctls (Input 0):
> > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> > test VIDIOC_QUERYCTRL: OK
> > test VIDIOC_G/S_CTRL: OK
> > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> > Standard Controls: 3 Private Controls: 0
> >
> > Format ioctls (Input 0):
> > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> > test VIDIOC_G/S_PARM: OK
> > test VIDIOC_G_FBUF: OK (Not Supported)
> > test VIDIOC_G_FMT: OK
> > test VIDIOC_TRY_FMT: OK
> > test VIDIOC_S_FMT: OK
> > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > test Cropping: OK (Not Supported)
> > test Composing: OK (Not Supported)
> > test Scaling: OK (Not Supported)
> >
> > Codec ioctls (Input 0):
> > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> >
> > Buffer ioctls (Input 0):
> > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> > test CREATE_BUFS maximum buffers: OK
> > test VIDIOC_REMOVE_BUFS: OK
> > test VIDIOC_EXPBUF: OK
> > test Requests: OK (Not Supported)
> >
> > Total for snps_hdmirx device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
> >
> > Changes in v4 :-
> > - Remove DTS changes included in the device tree patch
> > - Remove the hdmi rx pin info as it's already present
> > in the rk3588-base-pinctrl.dtsi
> > - Create a separate config option for selecting the EDID
> > and enable it by default
> > - Improve the comment related to DV timings and move it
> > to the side of hdmirx_get_detected_timings
> > - Add 100ms delay before pulling the HPD high
> > - Do not return the detected timings from VIDIOC_G_DV_TIMINGS
> > - Drop the bus info from hdmirx_querycap
> > - If *num_planes != 0 then return 0 in hdmirx_queue_setup
> > - Set queue->min_queued_buffers to 1
> > - Drop q->allow_cache_hints = 0; as it's always 0 by default
> > - Add a comment for q->dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS;
> > - Drop .read = vb2_fop_read as it's not supported by driver
> > - Remove redundant edid_init_data_600M
> > - Make HPD low when driver is loaded
> > - Add support for reading AVI Infoframe
> > - Remove msg_len checks from hdmirx_cec_transmit
> > - Add info about the CEC compliance test in the cover letter
> > - Add arbitration lost status
> > - Validate the physical address inside the EDID
> >
> > Changes in v3 :-
> > - Use v4l2-common helpers in the HDMIRX driver
> > - Rename cma node and phandle names
> > - Elaborate the comment to explain 160MiB calculation
> > - Move &hdmi_receiver_cma to the rock5b dts file
> > - Add information about interlaced video testing in the
> > cover-letter
> >
> > Changes in v2 :-
> > - Fix checkpatch --strict warnings
> > - Move the dt-binding include file changes in a separate patch
> > - Add a description for the hardware in the dt-bindings file
> > - Rename resets, vo1 grf and HPD properties
> > - Add a proper description for grf and vo1-grf phandles in the
> > bindings
> > - Rename the HDMI RX node name to hdmi-receiver
> > - Include gpio header file in binding example to fix the
> > dt_binding_check failure
> > - Move hdmirx_cma node to the rk3588.dtsi file
> > - Add an entry to MAINTAINERS file for the HDMIRX driver
> >
> > Shreeya Patel (4):
> > MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
> > dt-bindings: media: Document bindings for HDMI RX Controller
> > arm64: dts: rockchip: Add device tree support for HDMI RX Controller
> > media: platform: synopsys: Add support for hdmi input driver
> >
> > .../bindings/media/snps,dw-hdmi-rx.yaml | 132 +
> > MAINTAINERS | 8 +
> > .../dts/rockchip/rk3588-base-pinctrl.dtsi | 14 +
> > .../arm64/boot/dts/rockchip/rk3588-extra.dtsi | 56 +
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 1 +
> > drivers/media/platform/synopsys/Kconfig | 3 +
> > drivers/media/platform/synopsys/Makefile | 2 +
> > .../media/platform/synopsys/hdmirx/Kconfig | 27 +
> > .../media/platform/synopsys/hdmirx/Makefile | 4 +
> > .../platform/synopsys/hdmirx/snps_hdmirx.c | 2763 +++++++++++++++++
> > .../platform/synopsys/hdmirx/snps_hdmirx.h | 394 +++
> > .../synopsys/hdmirx/snps_hdmirx_cec.c | 285 ++
> > .../synopsys/hdmirx/snps_hdmirx_cec.h | 44 +
> > 14 files changed, 3734 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> > create mode 100644 drivers/media/platform/synopsys/Kconfig
> > create mode 100644 drivers/media/platform/synopsys/Makefile
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
> > create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
> >
>
More information about the Linux-rockchip
mailing list