[PATCH 3/4] arm64: dts: rockchip: Add base DT for rk3528 SoC

[Dragan Simic]

On 2024-08-04 15:20, Yao Zi wrote:
> On Sun, Aug 04, 2024 at 12:05:11PM +0200, Krzysztof Kozlowski wrote:
>> On 03/08/2024 14:55, Yao Zi wrote:
>> > This initial device tree describes CPU, interrupts and UART on the chip
>> > and is able to boot into basic kernel with only UART. Cache information
>> > is omitted for now as there is no precise documentation. Support for
>> > other features will be added later.
>> >
>> > Signed-off-by: Yao Zi <ziyao at disroot.org>
>> > ---
>> >  arch/arm64/boot/dts/rockchip/rk3528.dtsi | 182 +++++++++++++++++++++++
>> >  1 file changed, 182 insertions(+)
>> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3528.dtsi
>> >
>> > diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
>> > new file mode 100644
>> > index 000000000000..77687d9e7e80
>> > --- /dev/null
>> > +++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
>> > @@ -0,0 +1,182 @@
>> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> > +/*
>> > + * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
>> > + * Copyright (c) 2024 Yao Zi <ziyao at disroot.org>
>> > + */
>> > +
>> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> > +#include <dt-bindings/interrupt-controller/irq.h>
>> > +
>> > +/ {
>> > +	compatible = "rockchip,rk3528";
>> > +
>> > +	interrupt-parent = <&gic>;
>> > +	#address-cells = <2>;
>> > +	#size-cells = <2>;
>> > +
>> > +	aliases {
>> > +		serial0 = &uart0;
>> > +		serial1 = &uart1;
>> > +		serial2 = &uart2;
>> > +		serial3 = &uart3;
>> > +		serial4 = &uart4;
>> > +		serial5 = &uart5;
>> > +		serial6 = &uart6;
>> > +		serial7 = &uart7;
>> > +	};
>> > +
>> > +	cpus {
>> > +		#address-cells = <1>;
>> > +		#size-cells = <0>;
>> > +
>> > +		cpu-map {
>> > +			cluster0 {
>> > +				core0 {
>> > +					cpu = <&cpu0>;
>> > +				};
>> > +				core1 {
>> > +					cpu = <&cpu1>;
>> > +				};
>> > +				core2 {
>> > +					cpu = <&cpu2>;
>> > +				};
>> > +				core3 {
>> > +					cpu = <&cpu3>;
>> > +				};
>> > +			};
>> > +		};
>> > +
>> > +		cpu0: cpu at 0 {
>> > +			device_type = "cpu";
>> > +			compatible = "arm,cortex-a53";
>> > +			reg = <0x0>;
>> > +			enable-method = "psci";
>> > +		};
>> > +
>> > +		cpu1: cpu at 1 {
>> > +			device_type = "cpu";
>> > +			compatible = "arm,cortex-a53";
>> > +			reg = <0x1>;
>> > +			enable-method = "psci";
>> > +		};
>> > +
>> > +		cpu2: cpu at 2 {
>> > +			device_type = "cpu";
>> > +			compatible = "arm,cortex-a53";
>> > +			reg = <0x2>;
>> > +			enable-method = "psci";
>> > +		};
>> > +
>> > +		cpu3: cpu at 3 {
>> > +			device_type = "cpu";
>> > +			compatible = "arm,cortex-a53";
>> > +			reg = <0x3>;
>> > +			enable-method = "psci";
>> > +		};
>> > +	};
>> > +
>> > +	psci {
>> > +		compatible = "arm,psci-1.0", "arm,psci-0.2";
>> > +		method = "smc";
>> > +	};
>> > +
>> > +	timer {
>> > +		compatible = "arm,armv8-timer";
>> > +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> > +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> > +	};
>> > +
>> > +	xin24m: xin24m {
>> 
>> Please use name for all fixed clocks which matches current format
>> recommendation: 'clock-([0-9]+|[a-z0-9-]+)+'
> 
> Will be fixed in next revision.

Hmm, why should we apply that rule to the xin24m clock, which is
named exactly like that everywhere else in Rockchip SoC dtsi files?
It's much better to remain consistent.

>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml?h=v6.11-rc1
>> 
>> > +		compatible = "fixed-clock";
>> > +		#clock-cells = <0>;
>> > +		clock-frequency = <24000000>;
>> > +		clock-output-names = "xin24m";
>> > +	};
>> > +
>> > +	gic: interrupt-controller at fed01000 {
>> 
>> Why this all is outside of SoC?
> 
> Just as Heiko says, device tree for all other Rockchip SoCs don't have
> a "soc" node. I didn't know why before but just follow the style.
> 
> If you prefer add a soc node, I am willing to.