[PATCH] arm64: dts: rockchip: remove startup-delay-us from vcc3v3_pcie2x1l0 on rock-5b
Sebastian Reichel
sebastian.reichel at collabora.com
Fri Apr 12 09:09:13 PDT 2024
Hi,
On Wed, Apr 10, 2024 at 02:30:16PM +0800, Shawn Lin wrote:
> Hi Jianfeng,
>
> On 2024/4/1 16:13, Jianfeng Liu wrote:
> > Property startup-delay-us is copied from vendor dts and it will
> > make kernel not detect pcie wifi device. If I run command:
> > "echo 1 > /sys/bus/pci/rescan", pcie wifi device is detected, but
> > my wifi device RTL8822CE failed to load driver. Another device
> > RTL8723BE can load driver but no wifi signal is detected.
> >
> > Removing this property will fix issues above.
> >
> > Signed-off-by: Jianfeng Liu <liujianfeng1994 at gmail.com>
>
> startup-delay-us just make sure the power rail is stable before
> any action is taken to start the link, preventing the device from
> unable to work stably. So it shouldn't be the root cause I think.
>
> Could you help try this patch to checkout if it works for you?
>
> diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> index d684214..df30127 100644
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -167,7 +167,7 @@ static int rockchip_pcie_start_link(struct dw_pcie *pci)
> struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
>
> /* Reset device */
> - gpiod_set_value_cansleep(rockchip->rst_gpio, 0);
> + //gpiod_set_value_cansleep(rockchip->rst_gpio, 0);
Is this removal actually needed?
>
> rockchip_pcie_enable_ltssm(rockchip);
>
> @@ -180,7 +180,7 @@ static int rockchip_pcie_start_link(struct dw_pcie *pci)
> * We need more extra time as before, rather than setting just
> * 100us as we don't know how long should the device need to reset.
> */
> - msleep(100);
> + msleep(300);
> gpiod_set_value_cansleep(rockchip->rst_gpio, 1);
>
> return 0;
> @@ -311,6 +311,8 @@ static int rockchip_pcie_probe(struct platform_device
> *pdev)
> if (ret)
> return ret;
>
> + gpiod_set_value_cansleep(rockchip->rst_gpio, 0);
I suppose it makes sense to use GPIOD_OUT_LOW in
rockchip_pcie_resource_get(), so that the GPIO is requested low from
the start instead of being high for a very short amount of time.
Greetings,
-- Sebastian
> +
> /* DON'T MOVE ME: must be enable before PHY init */
> rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
>
>
>
> > ---
> > arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > index d6bf2ee07..a9af654a0 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> > @@ -76,7 +76,6 @@ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
> > regulator-boot-on;
> > regulator-min-microvolt = <3300000>;
> > regulator-max-microvolt = <3300000>;
> > - startup-delay-us = <50000>;
> > vin-supply = <&vcc5v0_sys>;
> > };
> >
> > --
> > 2.34.1
> >
> >
> > _______________________________________________
> > Linux-rockchip mailing list
> > Linux-rockchip at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20240412/5d13eb17/attachment-0001.sig>
More information about the Linux-rockchip
mailing list