[PATCH V2 2/3] arm64: dts: rockchip: add USB2 to rk3588s-indiedroid

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Enable USB2 (EHCI and OCHI mode) support for the Indiedroid Nova. This
adds support for USB for the 4 full size USB-A ports. Note that USB 3
(the two blue full-size USB-A ports) is still outstanding, as is
support for USB on the USB-C ports. The controller is not yet supported
for these ports.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 646f49cc9e53..1e2336d3065b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -751,6 +751,24 @@ &tsadc {
 	status = "okay";
 };
 
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
@@ -775,3 +793,19 @@ bluetooth {
 		pinctrl-names = "default";
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
-- 
2.34.1