[PATCH v3 4/6] arm64: dts: rockchip: add missing mandatory rk3568 PCIe atu reg

[Niklas Cassel]

From: Niklas Cassel <niklas.cassel at wdc.com>

>From the snps,dw-pcie.yaml devicetree binding:
"At least DBI reg-space and peripheral devices CFG-space outbound window
are required for the normal controller work. iATU memory IO region is
also required if the space is unrolled (IP-core version >= 4.80a)."

All the PCIe controllers in rk3568 are using the iATU unroll feature,
and thus have to supply the atu reg in the device tree node.

Without this patch, the driver will not be able to detect all the inbound
and outbound iATUs. (The default iATU range that is used by by the driver,
when no atu reg is found, allows the driver to detect up to a maximum
of 8 inbound and 8 outbound iATUs.)

Signed-off-by: Niklas Cassel <niklas.cassel at wdc.com>
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 14 ++++++++------
 arch/arm64/boot/dts/rockchip/rk356x.dtsi |  7 ++++---
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 4487754065b7..019429891288 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -90,13 +90,14 @@ pcie3x1: pcie at fe270000 {
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3568_PD_PIPE>;
-		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		reg = <0x3 0xc0400000 0x0 0x00300000>,
 		      <0x0 0xfe270000 0x0 0x00010000>,
-		      <0x0 0xf2000000 0x0 0x00100000>;
+		      <0x0 0xf2000000 0x0 0x00100000>,
+		      <0x3 0xc0700000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config", "atu";
 		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
 			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
-		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X1_POWERUP>;
 		reset-names = "pipe";
 		/* bifurcation; lane1 when using 1+1 */
@@ -141,13 +142,14 @@ pcie3x2: pcie at fe280000 {
 		phys = <&pcie30phy>;
 		phy-names = "pcie-phy";
 		power-domains = <&power RK3568_PD_PIPE>;
-		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		reg = <0x3 0xc0800000 0x0 0x00300000>,
 		      <0x0 0xfe280000 0x0 0x00010000>,
-		      <0x0 0xf0000000 0x0 0x00100000>;
+		      <0x0 0xf0000000 0x0 0x00100000>,
+		      <0x3 0xc0b00000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config", "atu";
 		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
 			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
 			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
-		reg-names = "dbi", "apb", "config";
 		resets = <&cru SRST_PCIE30X2_POWERUP>;
 		reset-names = "pipe";
 		/* bifurcation; lane0 when using 1+1 */
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index e2d99613109b..872c6bc28559 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -961,10 +961,11 @@ qos_vop_m1: qos at fe1a8100 {
 
 	pcie2x1: pcie at fe260000 {
 		compatible = "rockchip,rk3568-pcie";
-		reg = <0x3 0xc0000000 0x0 0x00400000>,
+		reg = <0x3 0xc0000000 0x0 0x00300000>,
 		      <0x0 0xfe260000 0x0 0x00010000>,
-		      <0x0 0xf4000000 0x0 0x00100000>;
-		reg-names = "dbi", "apb", "config";
+		      <0x0 0xf4000000 0x0 0x00100000>,
+		      <0x3 0xc0300000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config", "atu";
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.41.0