[PATCH v2] media: i2c: ov8858: Don't set fwnode in the driver

[Ondřej Jirman]

From: Ondrej Jirman <megi at xff.cz>

This makes the driver work with the new check in
v4l2_async_register_subdev() that was introduced recently in 6.6-rc1.
Without this change, probe fails with:

ov8858 1-0036: Detected OV8858 sensor, revision 0xb2
ov8858 1-0036: sub-device fwnode is an endpoint!
ov8858 1-0036: v4l2 async register subdev failed
ov8858: probe of 1-0036 failed with error -22

This also simplifies the driver a bit.

Signed-off-by: Ondrej Jirman <megi at xff.cz>
---
v2:
- call fwnode_handle_put earlier to avoid multiple calls to it in
  error code paths (suggested by Jacopo Mondi)

 drivers/media/i2c/ov8858.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/ov8858.c b/drivers/media/i2c/ov8858.c
index 3af6125a2eee..4d9fd76e2f60 100644
--- a/drivers/media/i2c/ov8858.c
+++ b/drivers/media/i2c/ov8858.c
@@ -1850,9 +1850,9 @@ static int ov8858_parse_of(struct ov8858 *ov8858)
 	}
 
 	ret = v4l2_fwnode_endpoint_parse(endpoint, &vep);
+	fwnode_handle_put(endpoint);
 	if (ret) {
 		dev_err(dev, "Failed to parse endpoint: %d\n", ret);
-		fwnode_handle_put(endpoint);
 		return ret;
 	}
 
@@ -1864,12 +1864,9 @@ static int ov8858_parse_of(struct ov8858 *ov8858)
 	default:
 		dev_err(dev, "Unsupported number of data lanes %u\n",
 			ov8858->num_lanes);
-		fwnode_handle_put(endpoint);
 		return -EINVAL;
 	}
 
-	ov8858->subdev.fwnode = endpoint;
-
 	return 0;
 }
 
@@ -1913,7 +1910,7 @@ static int ov8858_probe(struct i2c_client *client)
 
 	ret = ov8858_init_ctrls(ov8858);
 	if (ret)
-		goto err_put_fwnode;
+		return ret;
 
 	sd = &ov8858->subdev;
 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
@@ -1964,8 +1961,6 @@ static int ov8858_probe(struct i2c_client *client)
 	media_entity_cleanup(&sd->entity);
 err_free_handler:
 	v4l2_ctrl_handler_free(&ov8858->ctrl_handler);
-err_put_fwnode:
-	fwnode_handle_put(ov8858->subdev.fwnode);
 
 	return ret;
 }
@@ -1978,7 +1973,6 @@ static void ov8858_remove(struct i2c_client *client)
 	v4l2_async_unregister_subdev(sd);
 	media_entity_cleanup(&sd->entity);
 	v4l2_ctrl_handler_free(&ov8858->ctrl_handler);
-	fwnode_handle_put(ov8858->subdev.fwnode);
 
 	pm_runtime_disable(&client->dev);
 	if (!pm_runtime_status_suspended(&client->dev))
-- 
2.42.0