[PATCH v4 00/45] drm/connector: Create HDMI Connector infrastructure
Hans Verkuil
hverkuil at xs4all.nl
Tue Nov 28 02:45:40 PST 2023
On 28/11/2023 11:24, Maxime Ripard wrote:
> Hi,
>
> Here's a series that creates some extra infrastructure specifically
> targeted at HDMI controllers.
>
> The idea behind this series came from a recent discussion on IRC during
> which we discussed infoframes generation of i915 vs everything else.
>
> Infoframes generation code still requires some decent boilerplate, with
> each driver doing some variation of it.
>
> In parallel, while working on vc4, we ended up converting a lot of i915
> logic (mostly around format / bpc selection, and scrambler setup) to
> apply on top of a driver that relies only on helpers.
>
> While currently sitting in the vc4 driver, none of that logic actually
> relies on any driver or hardware-specific behaviour.
>
> The only missing piece to make it shareable are a bunch of extra
> variables stored in a state (current bpc, format, RGB range selection,
> etc.).
>
> The initial implementation was relying on some generic subclass of
> drm_connector to address HDMI connectors, with a bunch of helpers that
> will take care of all the "HDMI Spec" related code. Scrambler setup is
> missing at the moment but can easily be plugged in.
>
> The feedback was that creating a connector subclass like was done for
> writeback would prevent the adoption of those helpers since it couldn't
> be used in all situations (like when the connector driver can implement
> multiple output) and required more churn to cast between the
> drm_connector and its subclass. The decision was thus to provide a set
> of helper and to store the required variables in drm_connector and
> drm_connector_state. This what has been implemented now.
>
> Hans Verkuil also expressed interest in implementing a mechanism in v4l2
> to retrieve infoframes from HDMI receiver and implementing an
> infoframe-decode tool.
For those who are interested in the InfoFrame parser:
https://git.linuxtv.org/hverkuil/edid-decode.git/log/?h=hverkuil
This is work-in-progress, and will definitely be rebased at times.
It is integrated into edid-decode since I want to be able to check the
InfoFrames against the EDID capabilities. If no EDID is given, then
those checks are skipped.
You can parse the InfoFrames with -I <path-to-if-file>. All known InfoFrames
are parsed, and I am working on adding the checks against the EDID whenever
time permits.
It's quite handy already as a parser, but it is really the checks against the
EDID that will make this really useful.
A related note: exposing InfoFrames is equally useful for the media subsystem
for video receivers (and the odd V4L2 video transmitter driver). I did look
at whether any of this drm code could be generalized, but it is too different
and frankly not worth the effort.
Also, when receiving InfoFrames you don't want to use the hdmi.h functions,
you want to dump the raw unprocessed InfoFrame.
I did a proof-of-concept for the adv7511-v4l2 tx and adv7604 rx drivers here:
https://git.linuxtv.org/hverkuil/media_tree.git/commit/?h=infoframe&id=19c80e21b30e2cafc0669cfae093a0b7a17c6b55
I am using debugfs here as well, but I am not actually certain whether that's
the best approach, esp. for receivers where access to InfoFrames can be very
useful for userspace. Options are e.g. /sys/class/video4linux/<devnode>/infoframes
or perhaps using V4L2 controls. TBD.
Regards,
Hans
>
> This series thus leverages the infoframe generation code to expose it
> through debugfs.
>
> I also used the occasion to unit-test everything but the infoframe
> generation, which can come later once I get a proper understanding of
> what the infoframe are supposed to look like. This required to add some
> extra kunit helpers and infrastructure to have multiple EDIDs and allow
> each test to run with a particular set of capabilities.
>
> This entire series has been tested on a Pi4, passes all its unittests
> (125 new tests), and has only been build-tested for sunxi and rockchip.
>
> Let me know what you think,
> Maxime
>
> Signed-off-by: Maxime Ripard <mripard at kernel.org>
> ---
> Changes in v4:
> - Create unit tests for everything but infoframes
> - Fix a number of bugs identified by the unit tests
> - Rename DRM (Dynamic Range and Mastering) infoframe file to HDR_DRM
> - Drop RFC status
> - Link to v3: https://lore.kernel.org/r/20231031-kms-hdmi-connector-state-v3-0-328b0fae43a7@kernel.org
>
> Changes in v3:
> - Made sure the series work on the RaspberryPi4
> - Handle YUV420 in the char clock rate computation
> - Use the maximum bpc value the connector allows at reset
> - Expose the RGB Limited vs Full Range value in the connector state
> instead of through a helper
> - Fix Broadcast RGB documentation
> - Add more debug logging
> - Small fixes here and there
> - Link to v2: https://lore.kernel.org/r/20230920-kms-hdmi-connector-state-v2-0-17932daddd7d@kernel.org
>
> Changes in v2:
> - Change from a subclass to a set of helpers for drm_connector and
> drm_connector state
> - Don't assume that all drivers support RGB, YUV420 and YUV422 but make
> them provide a bitfield instead.
> - Don't assume that all drivers support the Broadcast RGB property but
> make them call the registration helper.
> - Document the Broacast RGB property
> - Convert the inno_hdmi and sun4i_hdmi driver.
> - Link to v1: https://lore.kernel.org/r/20230814-kms-hdmi-connector-state-v1-0-048054df3654@kernel.org
>
> ---
> Maxime Ripard (45):
> drm/tests: helpers: Include missing drm_drv header
> drm/tests: helpers: Add atomic helpers
> drm/tests: Add helper to create mock plane
> drm/tests: Add helper to create mock crtc
> drm/connector: Check drm_connector_init pointers arguments
> drm/tests: connector: Add tests for drmm_connector_init
> drm/connector: Introduce an HDMI connector initialization function
> drm/connector: hdmi: Create an HDMI sub-state
> drm/connector: hdmi: Add Broadcast RGB property
> drm/connector: hdmi: Add RGB Quantization Range to the connector state
> drm/connector: hdmi: Add output BPC to the connector state
> drm/connector: hdmi: Add support for output format
> drm/connector: hdmi: Add HDMI compute clock helper
> drm/connector: hdmi: Calculate TMDS character rate
> drm/connector: hdmi: Add custom hook to filter TMDS character rate
> drm/connector: hdmi: Compute bpc and format automatically
> drm/connector: hdmi: Add Infoframes generation
> drm/connector: hdmi: Create Infoframe DebugFS entries
> drm/vc4: hdmi: Create destroy state implementation
> drm/vc4: hdmi: Switch to HDMI connector
> drm/vc4: tests: Remove vc4_dummy_plane structure
> drm/vc4: tests: Convert to plane creation helper
> drm/rockchip: inno_hdmi: Remove useless mode_fixup
> drm/rockchip: inno_hdmi: Remove useless copy of drm_display_mode
> drm/rockchip: inno_hdmi: Switch encoder hooks to atomic
> drm/rockchip: inno_hdmi: Get rid of mode_set
> drm/rockchip: inno_hdmi: no need to store vic
> drm/rockchip: inno_hdmi: Remove unneeded has audio flag
> drm/rockchip: inno_hdmi: Remove useless input format
> drm/rockchip: inno_hdmi: Remove useless output format
> drm/rockchip: inno_hdmi: Remove useless colorimetry
> drm/rockchip: inno_hdmi: Remove useless enum
> drm/rockchip: inno_hdmi: Remove tmds rate from structure
> drm/rockchip: inno_hdmi: Remove useless coeff_csc matrix
> drm/rockchip: inno_hdmi: Remove useless mode_valid
> drm/rockchip: inno_hdmi: Move infoframe disable to separate function
> drm/rockchip: inno_hdmi: Create mask retrieval functions
> drm/rockchip: inno_hdmi: Switch to infoframe type
> drm/rockchip: inno_hdmi: Remove unused drm device pointer
> drm/rockchip: inno_hdmi: Switch to HDMI connector
> drm/sun4i: hdmi: Convert encoder to atomic
> drm/sun4i: hdmi: Move mode_set into enable
> drm/sun4i: hdmi: Switch to container_of_const
> drm/sun4i: hdmi: Consolidate atomic_check and mode_valid
> drm/sun4i: hdmi: Switch to HDMI connector
>
> Documentation/gpu/kms-properties.csv | 1 -
> drivers/gpu/drm/Kconfig | 1 +
> drivers/gpu/drm/drm_atomic.c | 11 +
> drivers/gpu/drm/drm_atomic_state_helper.c | 659 ++++++++
> drivers/gpu/drm/drm_atomic_uapi.c | 4 +
> drivers/gpu/drm/drm_connector.c | 249 +++
> drivers/gpu/drm/drm_debugfs.c | 110 ++
> drivers/gpu/drm/rockchip/inno_hdmi.c | 409 ++---
> drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 203 ++-
> drivers/gpu/drm/tests/Makefile | 1 +
> .../gpu/drm/tests/drm_atomic_state_helper_test.c | 1728 ++++++++++++++++++++
> drivers/gpu/drm/tests/drm_connector_test.c | 1345 ++++++++++++++-
> drivers/gpu/drm/tests/drm_kunit_edid.h | 482 ++++++
> drivers/gpu/drm/tests/drm_kunit_helpers.c | 150 ++
> drivers/gpu/drm/vc4/tests/vc4_mock.c | 6 +-
> drivers/gpu/drm/vc4/tests/vc4_mock.h | 9 +-
> drivers/gpu/drm/vc4/tests/vc4_mock_plane.c | 44 +-
> drivers/gpu/drm/vc4/vc4_hdmi.c | 624 +------
> drivers/gpu/drm/vc4/vc4_hdmi.h | 44 +-
> drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 6 +-
> include/drm/drm_atomic_state_helper.h | 12 +
> include/drm/drm_connector.h | 257 +++
> include/drm/drm_kunit_helpers.h | 23 +
> 23 files changed, 5389 insertions(+), 989 deletions(-)
> ---
> base-commit: 815d8b0425ad1164e45953ac3d56a9f6f63792cc
> change-id: 20230814-kms-hdmi-connector-state-616787e67927
>
> Best regards,
More information about the Linux-rockchip
mailing list