[PATCH v2 3/9] i2c: rk3x: Adjust offset for i2c2 on rv1126

[Tim Lunn]

Rockchip RV1126 has special case mask bits for i2c2.

i2c2 wasnt previously enabled in rv1126.dtsi, adding DT node alone
is not sufficient to enable i2c2. This patch fixes the i2c2 bus.

Signed-off-by: Tim Lunn <tim at feathertop.org>
---

Changes in v2:
- i2c: clarify commit message

 drivers/i2c/busses/i2c-rk3x.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index a044ca0c35a1..151927466d1d 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1288,8 +1288,11 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 			return -EINVAL;
 		}
 
-		/* 27+i: write mask, 11+i: value */
-		value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
+		if (i2c->soc_data == &rv1126_soc_data && bus_nr == 2)
+			value = BIT(20) | BIT(4);
+		else
+			/* 27+i: write mask, 11+i: value */
+			value = BIT(27 + bus_nr) | BIT(11 + bus_nr);
 
 		ret = regmap_write(grf, i2c->soc_data->grf_offset, value);
 		if (ret != 0) {
-- 
2.40.1