[PATCH v14 08/56] media: videobuf2: Use vb2_get_num_buffers() helper
Tomasz Figa
tfiga at chromium.org
Wed Nov 8 20:36:21 PST 2023
On Wed, Nov 8, 2023 at 10:22 PM Benjamin Gaignard
<benjamin.gaignard at collabora.com> wrote:
>
>
> Le 08/11/2023 à 10:42, Tomasz Figa a écrit :
> > On Tue, Oct 31, 2023 at 05:30:16PM +0100, Benjamin Gaignard wrote:
> >> Stop using queue num_buffers field directly, instead use
> >> vb2_get_num_buffers().
> >> This prepares for the future 'delete buffers' feature where there are
> >> holes in the buffer indices.
> >>
> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
> >> ---
> >> .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++--------
> >> .../media/common/videobuf2/videobuf2-v4l2.c | 4 +-
> >> 2 files changed, 54 insertions(+), 42 deletions(-)
> >>
> >> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
> >> index b406a30a9b35..c5c5ae4d213d 100644
> >> --- a/drivers/media/common/videobuf2/videobuf2-core.c
> >> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
> >> @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
> >> unsigned int num_buffers, unsigned int num_planes,
> >> const unsigned plane_sizes[VB2_MAX_PLANES])
> >> {
> >> + unsigned int q_num_buffers = vb2_get_num_buffers(q);
> >> unsigned int buffer, plane;
> >> struct vb2_buffer *vb;
> >> int ret;
> >>
> >> /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */
> >> num_buffers = min_t(unsigned int, num_buffers,
> >> - VB2_MAX_FRAME - q->num_buffers);
> >> + VB2_MAX_FRAME - q_num_buffers);
> > I guess it's safe in this specific situation, but was there any reason
> > behind not just calling vb2_get_num_buffers() directly here?
> >
> >>
> >> for (buffer = 0; buffer < num_buffers; ++buffer) {
> >> /* Allocate vb2 buffer structures */
> >> @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
> >> vb->planes[plane].min_length = plane_sizes[plane];
> >> }
> >>
> >> - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer);
> >> + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer);
> > In this case it should also be fine, but actually now this is a loop and if
> > somone doesn't know what the other code in the loop does, one could be
> > concerned that the num buffers actually could have changed, but we still
> > use the cached one that we got at the beginning of the function.
> >
> > (Ideally I'd imagine vb2_queue_add_buffer() to append the buffer
> > at the end of the queue and increment the num_buffers internally, but it
> > doesn't have to happen now, as this series is already quite complex...)
>
> That will be the case later in the series when I replace num_buffers field
> by a bitmap. Until that I prefer to limit the changes in this loop.
>
> >
> >> call_void_bufop(q, init_buffer, vb);
> >>
> >> /* Allocate video buffer memory for the MMAP type */
> > [snip]
> >> @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q)
> >> __vb2_cleanup_fileio(q);
> >> __vb2_queue_cancel(q);
> >> mutex_lock(&q->mmap_lock);
> >> - __vb2_queue_free(q, q->num_buffers);
> >> + __vb2_queue_free(q, vb2_get_num_buffers(q));
> >> + q->num_buffers = 0;
> > Unrelated change?
>
> No because I found a case where q->num_buffers wasn't correctly reset while testing.
>
Could you provide more details about that case? Shouldn't it be fixed instead?
It's a bit weird to me, because __vb2_queue_free() is supposed to
decrement q->num_buffers by the number of buffers freed and it's
called with vb2_get_num_buffers() just one line above.
> >
> >> mutex_unlock(&q->mmap_lock);
> >> }
> >> EXPORT_SYMBOL_GPL(vb2_core_queue_release);
> >> @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file,
> >> /*
> >> * Start file I/O emulator only if streaming API has not been used yet.
> >> */
> >> - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) {
> >> + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) {
> >> if (!q->is_output && (q->io_modes & VB2_READ) &&
> >> (req_events & (EPOLLIN | EPOLLRDNORM))) {
> >> if (__vb2_init_fileio(q, 1))
> >> @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file,
> >> * For output streams you can call write() as long as there are fewer
> >> * buffers queued than there are buffers available.
> >> */
> >> - if (q->is_output && q->fileio && q->queued_count < q->num_buffers)
> >> + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q))
> >> return EPOLLOUT | EPOLLWRNORM;
> >>
> >> if (list_empty(&q->done_list)) {
> >> @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf {
> >> * struct vb2_fileio_data - queue context used by file io emulator
> >> *
> >> * @cur_index: the index of the buffer currently being read from or
> >> - * written to. If equal to q->num_buffers then a new buffer
> >> - * must be dequeued.
> >> + * written to. If equal to number of already queued buffers
> >> + * then a new buffer must be dequeued.
> > Hmm, that's a significant meaning change compared to the original text. Is
> > it indended?
>
> Does "If equal to number of buffers in the vb2_queue then a new buffer must be dequeued."
> sound better for you ?
Yes, I think now it matches the original meaning. Thanks.
>
> >
> >> * @initial_index: in the read() case all buffers are queued up immediately
> >> * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles
> >> * buffers. However, in the write() case no buffers are initially
> >> @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf {
> >> * buffers. This means that initially __vb2_perform_fileio()
> >> * needs to know what buffer index to use when it is queuing up
> >> * the buffers for the first time. That initial index is stored
> >> - * in this field. Once it is equal to q->num_buffers all
> >> + * in this field. Once it is equal to num_buffers all
> > It's not clear what num_buffers means here. Would it make sense to instead
> > say "number of buffers in the vb2_queue"?
>
> Yes I will change that
>
> >
> >> * available buffers have been queued and __vb2_perform_fileio()
> >> * should start the normal dequeue/queue cycle.
> >> *
> >> @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
> >> /*
> >> * Check if streaming api has not been already activated.
> >> */
> >> - if (q->streaming || q->num_buffers > 0)
> >> + if (q->streaming || vb2_get_num_buffers(q) > 0)
> >> return -EBUSY;
> >>
> >> /*
> >> @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
> >> /*
> >> * Get kernel address of each buffer.
> >> */
> >> - for (i = 0; i < q->num_buffers; i++) {
> >> + for (i = 0; i < vb2_get_num_buffers(q); i++) {
> >> /* vb can never be NULL when using fileio. */
> >> vb = vb2_get_buffer(q, i);
> >>
> >> @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
> >> /*
> >> * Queue all buffers.
> >> */
> >> - for (i = 0; i < q->num_buffers; i++) {
> >> - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL);
> >> + for (i = 0; i < vb2_get_num_buffers(q); i++) {
> >> + struct vb2_buffer *vb2 = vb2_get_buffer(q, i);
> >> +
> >> + if (!vb2)
> >> + continue;
> >> +
> >> + ret = vb2_core_qbuf(q, vb2, NULL, NULL);
> >> if (ret)
> >> goto err_reqbufs;
> >> fileio->bufs[i].queued = 1;
> >> }
> > Doesn't this part belong to the previous patch that changes q->bufs[x] to
> > vb2_get_buffer()?
>
> Yes I will change that too.
>
> >
> >> /*
> >> * All buffers have been queued, so mark that by setting
> >> - * initial_index to q->num_buffers
> >> + * initial_index to num_buffers
> > What num_buffers?
>
> I will use your wording: "the number of buffers in the vb2_queue"
>
Thanks!
> >
> >> */
> >> - fileio->initial_index = q->num_buffers;
> >> - fileio->cur_index = q->num_buffers;
> >> + fileio->initial_index = vb2_get_num_buffers(q);
> >> + fileio->cur_index = fileio->initial_index;
> >> }
> >>
> >> /*
> >> @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
> >> * If we are queuing up buffers for the first time, then
> >> * increase initial_index by one.
> >> */
> >> - if (fileio->initial_index < q->num_buffers)
> >> + if (fileio->initial_index < vb2_get_num_buffers(q))
> >> fileio->initial_index++;
> >> /*
> >> * The next buffer to use is either a buffer that's going to be
> >> - * queued for the first time (initial_index < q->num_buffers)
> >> - * or it is equal to q->num_buffers, meaning that the next
> >> + * queued for the first time (initial_index < num_buffers)
> >> + * or it is equal to num_buffers, meaning that the next
> > What num_buffers?
>
> Same here
Thanks!
Best regards,
Tomasz
More information about the Linux-rockchip
mailing list