[PATCH v3 3/7] phy: phy-rockchip-inno-usb2: add reset support

[Sebastian Reichel]

Add reset handling support, which is needed for proper
operation with RK3588.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 2c4683c67a8e..101b46939f0b 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <linux/mfd/syscon.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
@@ -223,6 +224,7 @@ struct rockchip_usb2phy_port {
  * @clk: clock struct of phy input clk.
  * @clk480m: clock struct of phy output clk.
  * @clk480m_hw: clock struct of phy output clk management.
+ * @phy_reset: phy reset control.
  * @chg_state: states involved in USB charger detection.
  * @chg_type: USB charger types.
  * @dcd_retries: The retry count used to track Data contact
@@ -239,6 +241,7 @@ struct rockchip_usb2phy {
 	struct clk	*clk;
 	struct clk	*clk480m;
 	struct clk_hw	clk480m_hw;
+	struct reset_control	*phy_reset;
 	enum usb_chg_state	chg_state;
 	enum power_supply_type	chg_type;
 	u8			dcd_retries;
@@ -280,6 +283,25 @@ static inline bool property_enabled(struct regmap *base,
 	return tmp != reg->disable;
 }
 
+static int rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
+{
+	int ret;
+
+	ret = reset_control_assert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	udelay(10);
+
+	ret = reset_control_deassert(rphy->phy_reset);
+	if (ret)
+		return ret;
+
+	usleep_range(100, 200);
+
+	return 0;
+}
+
 static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
 {
 	struct rockchip_usb2phy *rphy =
@@ -534,6 +556,18 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
 		return ret;
 	}
 
+	/*
+	 * For rk3588, it needs to reset phy when exit from
+	 * suspend mode with common_on_n 1'b1(aka REFCLK_LOGIC,
+	 * Bias, and PLL blocks are powered down) for lower
+	 * power consumption. If you don't want to reset phy,
+	 * please keep the common_on_n 1'b0 to set these blocks
+	 * remain powered.
+	 */
+	ret = rockchip_usb2phy_reset(rphy);
+	if (ret)
+		return ret;
+
 	/* waiting for the utmi_clk to become stable */
 	usleep_range(1500, 2000);
 
@@ -1348,6 +1382,10 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	rphy->phy_reset = devm_reset_control_get_optional(dev, "phy");
+	if (IS_ERR(rphy->phy_reset))
+		return PTR_ERR(rphy->phy_reset);
+
 	rphy->clk = of_clk_get_by_name(np, "phyclk");
 	if (!IS_ERR(rphy->clk)) {
 		clk_prepare_enable(rphy->clk);
-- 
2.39.2