[RESEND] [PATCHv3 4/7] thermal: rockchip: Simplify channel id logic
Daniel Lezcano
daniel.lezcano at linaro.org
Thu Mar 16 03:05:25 PDT 2023
Hi Heiko,
On 08/03/2023 19:42, Sebastian Reichel wrote:
> Hi Daniel,
>
> On Wed, Mar 08, 2023 at 07:13:22PM +0100, Daniel Lezcano wrote:
>> On 08/03/2023 12:22, Sebastian Reichel wrote:
>>> Replace the channel ID lookup table by a simple offset, since
>>> the channel IDs are consecutive.
>>>
>>> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
>>
>> As all the other patches are reviewed by Heiko, is the tag missing here?
>
> Heiko was not happy with this in PATCHv2, when he reviewed most
> of the patches:
>
> https://lore.kernel.org/all/3601039.e9J7NaK4W3@phil/
>
> I replied, but never got a response, so I kept it as is:
>
> https://lore.kernel.org/all/20221206170232.xsm4kcbfwrmlrriw@mercury.elektranox.org/
>
> FWIW it is essential for the series and cannot be dropped, because
> RK3588 has more than 2 channels.
Do you have a suggestion to improve the proposed change ?
Thanks
-- Daniel
>>> ---
>>> drivers/thermal/rockchip_thermal.c | 48 +++++++++++++-----------------
>>> 1 file changed, 21 insertions(+), 27 deletions(-)
>>>
>>> diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
>>> index 9ed45b318344..bcbdd618daae 100644
>>> --- a/drivers/thermal/rockchip_thermal.c
>>> +++ b/drivers/thermal/rockchip_thermal.c
>>> @@ -39,15 +39,6 @@ enum tshut_polarity {
>>> TSHUT_HIGH_ACTIVE,
>>> };
>>> -/*
>>> - * The system has two Temperature Sensors.
>>> - * sensor0 is for CPU, and sensor1 is for GPU.
>>> - */
>>> -enum sensor_id {
>>> - SENSOR_CPU = 0,
>>> - SENSOR_GPU,
>>> -};
>>> -
>>> /*
>>> * The conversion table has the adc value and temperature.
>>> * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table)
>>> @@ -82,7 +73,7 @@ struct chip_tsadc_table {
>>> /**
>>> * struct rockchip_tsadc_chip - hold the private data of tsadc chip
>>> - * @chn_id: array of sensor ids of chip corresponding to the channel
>>> + * @chn_offset: the channel offset of the first channel
>>> * @chn_num: the channel number of tsadc chip
>>> * @tshut_temp: the hardware-controlled shutdown temperature value
>>> * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
>>> @@ -98,7 +89,7 @@ struct chip_tsadc_table {
>>> */
>>> struct rockchip_tsadc_chip {
>>> /* The sensor id of chip correspond to the ADC channel */
>>> - int chn_id[SOC_MAX_SENSORS];
>>> + int chn_offset;
>>> int chn_num;
>>> /* The hardware-controlled tshut property */
>>> @@ -925,8 +916,8 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
>>> }
>>> static const struct rockchip_tsadc_chip px30_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 0,
>>> .chn_num = 2, /* 2 channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
>>> @@ -949,7 +940,8 @@ static const struct rockchip_tsadc_chip px30_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> + /* cpu */
>>> + .chn_offset = 0,
>>> .chn_num = 1, /* one channel for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -973,7 +965,8 @@ static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> + /* cpu */
>>> + .chn_offset = 0,
>>> .chn_num = 1, /* one channel for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -997,8 +990,8 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
>>> - .chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 1,
>>> .chn_num = 2, /* two channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1022,7 +1015,8 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> + /* cpu */
>>> + .chn_offset = 0,
>>> .chn_num = 1, /* one channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_CRU, /* default TSHUT via CRU */
>>> @@ -1045,8 +1039,8 @@ static const struct rockchip_tsadc_chip rk3328_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 0,
>>> .chn_num = 2, /* two channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1070,8 +1064,8 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 0,
>>> .chn_num = 2, /* two channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1095,8 +1089,8 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 0,
>>> .chn_num = 2, /* two channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1120,8 +1114,8 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
>>> };
>>> static const struct rockchip_tsadc_chip rk3568_tsadc_data = {
>>> - .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
>>> - .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
>>> + /* cpu, gpu */
>>> + .chn_offset = 0,
>>> .chn_num = 2, /* two channels for tsadc */
>>> .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
>>> @@ -1404,7 +1398,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
>>> for (i = 0; i < thermal->chip->chn_num; i++) {
>>> error = rockchip_thermal_register_sensor(pdev, thermal,
>>> &thermal->sensors[i],
>>> - thermal->chip->chn_id[i]);
>>> + thermal->chip->chn_offset + i);
>>> if (error)
>>> return dev_err_probe(&pdev->dev, error,
>>> "failed to register sensor[%d].\n", i);
>>
>> --
>> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
>> <http://twitter.com/#!/linaroorg> Twitter |
>> <http://www.linaro.org/linaro-blog/> Blog
>>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
More information about the Linux-rockchip
mailing list