[v4,1/2] usb: typec: tcpm: fix cc role at port reset

Guenter Roeck linux at roeck-us.net
Fri Jun 16 01:33:48 PDT 2023


On 6/16/23 00:52, Frank Wang wrote:
> In the current implementation, the tcpm set CC1/CC2 role to open when
> it do port reset would cause the VBUS removed by the Type-C partner.
> 
> This sets CC1/CC2 according to the default state of port to fix it.
> 
> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>

Reviewed-by: Guenter Roeck <linux at roeck-us.net>

> ---
> Changelog:
> (no changes since v3)
> 
> v2:
>   - Make some tweaking based on the default state of port, commented by Guenter Roeck.
> 
Specifically: Do not set the state to TYPEC_CC_RD unconditionally
but make it dependent on the port's default state.

Guenter

> v1:
>   - https://patchwork.kernel.org/project/linux-usb/patch/20230313025843.17162-2-frank.wang@rock-chips.com/
> 
>   drivers/usb/typec/tcpm/tcpm.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 3c6b0c8e2d3ae..9f6aaa3e70ca8 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4885,7 +4885,8 @@ static void run_state_machine(struct tcpm_port *port)
>   		break;
>   	case PORT_RESET:
>   		tcpm_reset_port(port);
> -		tcpm_set_cc(port, TYPEC_CC_OPEN);
> +		tcpm_set_cc(port, tcpm_default_state(port) == SNK_UNATTACHED ?
> +			    TYPEC_CC_RD : tcpm_rp_cc(port));
>   		tcpm_set_state(port, PORT_RESET_WAIT_OFF,
>   			       PD_T_ERROR_RECOVERY);
>   		break;




More information about the Linux-rockchip mailing list