[PATCH v2 3/3] arm64: dts: rockchip: Add Radxa ROCK 4SE

[Christopher Obbard]

Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE
board. This board offers similar peripherals in a similar form-factor to
the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor
(which has different OPP table than the RK3399) and other minimal hardware
changes.

Signed-off-by: Christopher Obbard <chris.obbard at collabora.com>
---

Changes in v2:
- Set proper interrupt type for brcmf.

 arch/arm64/boot/dts/rockchip/Makefile         |  1 +
 .../boot/dts/rockchip/rk3399-rock-4se.dts     | 65 +++++++++++++++++++
 2 files changed, 66 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b7fb908eb92d..7ab29cbe71c4 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
new file mode 100644
index 000000000000..7cfc198bbae7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar at mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel at mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK 4SE";
+	compatible = "radxa,rock-4se", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi at 1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
-- 
2.40.1