[PATCH] arm64: dts: rockchip: Update sound card label on rk3588-rock-5b

[Cristian Ciocaltea]

The audio-graph-card driver uses the 'label' property to register the
sound card in the system, but the currently assigned string is too
generic and cannot be supported by alsa-project/alsa-ucm-conf:

  card 0: Analog [Analog]

Use the more specific naming "rk3588-es8316", which is still generic
enough to be shared with other compatible boards, e.g. Rock 5A. The
audio card will be listed as:

  card 0: rk3588es8316 [rk3588-es8316]

While at it, update also the DT node name, as there will be additional
sound related nodes available, i.e. for HDMI. Note that this involves
moving the node one position up, to preserve the alphabetical order.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
 .../boot/dts/rockchip/rk3588-rock-5b.dts      | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 51537030f8e3..87f4d5e9458d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -18,17 +18,9 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		cooling-levels = <0 95 145 195 255>;
-		fan-supply = <&vcc5v0_sys>;
-		pwms = <&pwm1 0 50000 0>;
-		#cooling-cells = <2>;
-	};
-
-	sound {
+	analog-sound {
 		compatible = "audio-graph-card";
-		label = "Analog";
+		label = "rk3588-es8316";
 
 		widgets = "Microphone", "Mic Jack",
 			  "Headphone", "Headphones";
@@ -43,6 +35,14 @@ sound {
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
 	vcc5v0_sys: vcc5v0-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
-- 
2.41.0