[PATCH v7 26/26] arm64: dts: rockchip: rk3588s: Add DFI

Sascha Hauer s.hauer at pengutronix.de
Tue Jul 4 02:32:42 PDT 2023


The DFI unit can be used to measure DRAM utilization using perf. Add the
node to the device tree. The DFI needs a rockchip,pmu phandle to the pmu
containing registers for SDRAM configuration details. This is added in
this patch as well.

Reviewed-by: Sebastian Reichel <sebastian.reichel at collabora.com>
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---

Notes:
    Changes since v4:
    - new patch

 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index a3124bd2e092c..723a17ec04361 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -397,6 +397,11 @@ scmi_shmem: sram at 0 {
 		};
 	};
 
+	pmu1grf: syscon at fd58a000 {
+		compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd58a000 0x0 0x10000>;
+	};
+
 	sys_grf: syscon at fd58c000 {
 		compatible = "rockchip,rk3588-sys-grf", "syscon";
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
@@ -1121,6 +1126,17 @@ qos_vop_m1: qos at fdf82200 {
 		reg = <0x0 0xfdf82200 0x0 0x20>;
 	};
 
+	dfi: dfi at fe060000 {
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		compatible = "rockchip,rk3588-dfi";
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "ch0", "ch1", "ch2", "ch3";
+		rockchip,pmu = <&pmu1grf>;
+	};
+
 	gmac1: ethernet at fe1c0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1c0000 0x0 0x10000>;
-- 
2.39.2




More information about the Linux-rockchip mailing list